The PROXIMA Lateral Monitor Arm is a stylish monitor arm from ErgoVerse that supports a single monitor above the work surface, allowing easy back, forward and sideways articulating motion with a maximum horizontal reach of 18.6" while being elevated at a fixed height up to 15.5" from desk to mid-monitor. The Quick-Release Adapter makes swapping out monitors fast and easy when needed. The monitor tilter offers the versatility of tilting 90° up, 20° down from center, or pivoting from landscape to portrait orientation. In addition, built-in cable management keeps wires neatly clipped around the pole mount. The included mounting options are desk clamp and grommet. The PROXIMA Lateral Monitor Arm supports monitors up to 20 lbs.

The small footprint of the PROXIMA Lateral Monitor Arm makes it ideal for installation on smaller desk surfaces, including standing desk add-ons. Although the PROXIMA Lateral Monitor Arm is available only for single monitors, those who have two monitors (or more) can purchase additional units due to the lower cost of the arm, while also achieving greater freedom in movement and placement of monitors.

Available in black or silver.

Le PROXIMA Lateral Monitor Arm d'ErgoVerse est un bras de moniteur élégant qui suspendra un seul moniteur au-dessus de la surface de travail, facilitant les mouvements vers l'avant, vers l'arrière, aussi que latéral avec un étendu horizontale maximum de 18.6po tout en étant soulevé à une hauteur fixe allant jusqu'à 15.5po du bureau au milieu du moniteur. En cas de besoin, l'adaptateur de Quick Release facilite le changement entre les moniteurs d'une à l'autre, vite fait. Le monitor tilter offre la possibilité d'incliner de 90° vers le haut, de 20° vers le bas du milieu, ou de pivoter de l'orientation paysage à l'orientation portrait. De plus, il inclus un canal pour un système de gestion de câbles autour le poteau. Les options de montage incluses sont la pince de bureau et l'œillet. Le PROXIMA Lateral Monitor Arm supporte les moniteurs pessants jusqu'à 20 livres.

Grâce à sa petite empreinte, le PROXIMA Lateral Monitor Arm est idéal pour utiliser sur des surfaces de bureaux petits, y compris les bureau assis-debout rétrofit. Bien que le PROXIMA Lateral Monitor Arm ne soit disponible que pour un seul moniteur, ceux qui ont deux moniteurs (ou plus) peuvent acheter des unités supplémentaires en raison du prix bas de ce bras, ce qui offre une plus grande liberté de mouvement et de placement des moniteurs.

Disponible en couleurs noir ou gris-argenter.

Mount one or two LCD monitors on the supplied pole with this space-saving mount. Position each monitor independently of the other, and quickly adjust pivot and tilt as your needs change. Set height at any desired position along the included 12" (30.5 cm) or 28" (71.1 cm) pole.

A Universal Mount with 6 mounting options is included. Weight capacity is up to 30 lbs (13.6 kg) per arm and each monitor can adjust independently. The arm is equipped with a 100 mm VESA Quick-Release adapter.

The Dual Horizontal 100 Series Desk Stand is an expandable, modular, tool-less Freestanding monitor mounting solution which allows two monitors to be positioned in a seamless 'side-by-side' orientation. The 25" wide crossbar has 2 Standard Quick Release Pivots which are capable of tilting 20° up, 10° down and 25° left and right and accommodate monitors up to 24" (measured diagonally bezel to bezel). This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. The pivots are VESA 75 and 100 compatible and can be adjusted along the crossbar. The heavy weighted 16" wide x 10" deep base and stand is 9 lbs and the vertical pole is 16".

This efficiently designed pole arm allows lateral extension up to 16" (40.6 cm) along a 12" (30.5 cm) or 28" pole which mounts using the versatile Universal FLEXMount. A wide degree of monitor tilt is available (over 200 degrees), including the ability to rotate the monitor from landscape to portrait orientation. Cables are retained using clips on the underside of the arm, keeping them out of view and out of harm's way.

The Dual Vertical 100 Series Desk Stand is an expandable, modular, tool-less Freestanding monitor mounting solution which allows two monitors to be positioned in a seamless 'one-above-the-other' orientation. The 28" pole has 2 Standard Quick Release Pivots are capable of tilting 20° up, 10° down and 25° left and right and accommodate monitors up to 24"(measured diagonally bezel to bezel). This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. The standard pivots are VESA 75 and 100 compatible and can be adjusted up and down the pole. The heavy weighted 16" wide x 10" deep base is 10 lbs and the vertical pole is 28".

The Adjustable POS Through-Counter Mount from Innovative is a durable mounting system for monitors, signature capture devices, and kiosks. Ideal for retail use, the mount secures the monitor firmly to the counter and allows you to pivot and turn it to any desired angle - and lock it in position if necessary. The mount supports monitors up to 25 lbs in weight and has an adjustable height of 7" - 36" determined by the position of the tube (which runs through the counter in the mount). Also, it has internal cable routing, so that cables pass through the counter in the tube. The mounting mechanism is VESA-monitor compatible - 75 mm & 100 mm adapters included.

NOTE: The Through Mount requires you to drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern (9189-24 + 9189-12 are Special Order)

The Triple Horizontal 100 Series Desk Stand is an expandable, modular, tool-less freestanding monitor mounting solution which allows three monitors to be positioned in a seamless "side-by-side" orientation. The 25" wide crossbar with telescoping wings provides up to 5 extra inches of extension on each side of the crossbar, accommodating up to three 27" monitors (measured diagonally bezel to bezel). This unit has 2 Height Adjustable Quick Release Pivots which can be precisely adjusted up and down using a simple knob. Both these outer pivots and the central standard pivot are capable of tilting 20° up, 10° down and 25° left and right. This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. All pivots are VESA 75 and 100 compatible and easily moved along the crossbar, or removed from the stand in seconds. The heavy weighted 18" wide x 16" deep heavy duty base is 29 lbs and the vertical pole is 16".

Le Triple Horizontal 100 Series Desk Stand est une solution sans outils pour supporter des moniteurs. Il est modulaire qui permet trois moniteurs d`être positionner dans une orientation côté à côté, aussi q` agrandis. La barre transversale de 25po de largeur avec des ailes télescopiques offre une extension supplémentaire de jusqu`à 5 pouces de chaque côté de la barre transversale, pouvant accueillir jusqu'à trois écrans de 27po (mesurés de diagonale du bezel à bezel). Ce modèle a 2 pivots Quick Release qui sont ajustables en hauteur, ce qui les permet d`être ajustés avec précision à l’aide d’un bouton. Ces deux pivots extérieurs et le pivot central peuvent basculer de 20º en haut, de 10º en bas et de 25º à gauche et à droite. Cela permet à l'utilisateur une amplitude de mouvement suffisante pour s'assurer que les moniteurs se trouvent dans quelle que soit la position souhaitée les uns par rapport aux autres, en plus de la possibilité de pivoter de l'orientation portrait à l'orientation paysage. Tous les pivots sont compatibles VESA 75 et 100 et se déplacent facilement le long de la barre transversale ou peuvent être enlever facilement. La base robuste et lourde de 18po de largeur x 16po de profondeur pèse 29 livres et le poteau vertical mesure 16po.

The Adjustable POS Countertop Mount from Innovative combines easy height adjustability with attractive design and durable construction for almost any retail environment. The monitor can be pivoted, turned, or locked into position for no movement. Cables are entirely hidden from view, passing through either the counter or the back exit of the mount. Weight capacity is 25 lbs or less.

The Quad "2 Over 2" 100 Series Desk Stand is an expandable, modular, tool-less Freestanding monitor mounting solution which allows four monitors to be positioned in a seamless 'grid' or 'square' orientation. Each row has a 25" wide crossbar accommodating up to two 24" monitors (measured diagonally bezel to bezel). This unit has 4 Sstandard Quick Release Pivots which are capable of tilting 20° up, 10° down and 25° left and right. This allows sufficient range of movement to ensure monitors are in almost any desired position relative to each other in addition to the capability of rotating from portrait to landscape orientation. The pivots are VESA 75 and 100 compatible and can be moved along the crossbar, or removed from the stand in seconds. The heavy weighted 18" wide x 16" deep Heavy Duty base is 29 lbs and the vertical pole is 28".

The Neo-Flex Extend LCD Arm from Ergotron offers a full 9.5" of height adjustment and can be used to position the middle of the monitor anywhere from 9" to almost 18.5" above the mounting point. At maximum extension from the mount it can also reach a full 23". This is a pole-mount arm that requires manual adjustment along the 12" upright. The Extend LCD Arm is also modular which means that where space is limited it is possible to remove one or both of the extensions to reduce the extension reach. However, this is accomplished with an accompanying loss of both articulation range and elevation. Since the complete arm folds back to under 5" there really is no need to remove the extensions. Weight capacity is from 7 to 20 lbs.