The CORVUS Corner Converter from ErgoVerse is used to create a usable workspace out of a tightly curved or inside right angled corner. The steel plate creates a diagonal bridge (21" wide) between the supporting surfaces, facilitating full utilization the entire workstation. The CORVUS Corner Converter gives access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The CORVUS features large dimensions that make it suitable for use with any combination of keyboards and pointing devices. The 39" width is sufficient to easily accommodate a standard full width or split adjustable keyboard while still providing sufficient space to easily deploy a traditional mouse to not just one but both sides of the keyboard. The 13" extra deep design also makes the CORVUS Corner Converter ideal for use where central pointing devices are being deployed.

Unlike some similar products that have odd or unusual shapes, the clean rectangular design of the CORVUS ensures that both keyboards and mousing devices have sufficient surface area to ensure stability while being used. And for situations where a keyboard arm and tray need to be mounted, the lower lip of the CORVUS Corner Converter is pre-drilled to accommodate easy mounting of common keyboard arms.

The CORVUS Corner Converter can be mounted to most desks up to 1.37" thick. The heavy steel plate rests firmly on the desk without sliding and is equipped with pads to protect the desk surface.

Note: While the CORVUS Corner Converter does provide a bridging width of 21", the overall width of 39" does require a fair amount of desk surface for installation. If there are space restrictions it may be necessary to consider a similar product with a smaller overall footprint.

Le CORVUS Corner Converter d'ErgoVerse est utilisé pour créer un espace de travail utilisable à partir d'un coin étroitement courbé ou d'un angle droit intérieur. Le plateau d'acier crée un pont diagonal (21po de large) entre les surfaces d'appui, facilitant ainsi l'utilisation de tout le poste de travail. Le CORVUS Corner Converter donne accès à une zone de travail élargie (droite, gauche et angle), améliorant l'ergonomie de l'espace de travail.

Le CORVUS Corner Converter présente de grandes dimensions qui lui permettent d'être utilisé avec n'importe quelle combinaison de claviers et de dispositifs de pointage. La largeur de 39po est suffisante pour accueillir facilement un clavier standard réglable en largeur ou en deux parties, tout en offrant suffisamment d'espace pour bouger facilement une souris traditionnelle non seulement d'un côté mais des deux côtés du clavier. La conception extra profonde de 13po rend également le CORVUS Corner Converter idéal pour une utilisation où des dispositifs de pointage centraux sont utilisés.

Contrairement à certains produits similaires qui ont des formes bizarres ou inhabituelles, la conception rectangulaire du CORVUS garantit que les claviers et les souris ont une surface suffisante pour assurer la stabilité pendant l'utilisation. Et pour les situations où un bras de clavier et une tablette (tray) doivent être montés, la lèvre du bas sur le CORVUS Corner Converter est pré-percée pour permettre un montage facile des bras courants.

Le CORVUS Corner Converter peut être monté sur la plupart des bureaux d'une épaisseur maximale de 1.37po. Le plateau en acier lourd repose fermement sur le bureau sans glisser et est équipée de coussinets pour protéger la surface du bureau.

Veuillez noter: Bien que le CORVUS Corner Converter offre une largeur de pontage de 21po, la largeur totale de 39po nécessite une surface de bureau assez importante pour l'installation. Si l'espace est limité, il peut être nécessaire de considérer un produit similaire avec une empreinte globale plus petite.

The Corner Conversion Kit from Fox Bay Industries is designed to convert a right angled or tightly curved inside corner into a usable work space. The steel plate creates a rigid bridge across the corner, converting an often cramped and awkward layout into an ergonomically suitable workstation. Users are now able to work turned to the corner with easy access to an expanded desk surface to both the right and left. These also provide a means of mounting an articulating keyboard arm into corners where they cannot otherwise be installed.

This 13.5" converter works well on smaller workstations where there is limited space, such as tight cubicle applications. It provides just enough of a diagonal that most individuals would be able to work turned towards the corner or also can serve to support a corner-mount articulating keyboard tray.

The DE100 Corner Sleeve from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angled corner. The steel plate creates a diagonal bridge (20.375" wide) between the adjacent supporting surfaces, enabling onr to fully utilize the entire workstation. The worker is now given access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The shape and dimensions of the DE100 Corner Sleeve make it suitable for desk top keyboard and mouse use. With an upper surface width of 29.5" and a depth of over 12.25" the DE100 Corner Sleeve is compatible with most common keyboard and mouse combinations. It is also equally suited to keyboard arm and tray deployment as the underside of the unit is pre-drilled to accommodate most common keyboard arms with no additional modifications required. The Keyboard Tray Corner Sleeve can be easily adjusted to fit desks from 1" to 1.5" thick.

Note: If the bridging width of the DE100 Corner Sleeve is too great a smaller alternative solution should be considered.

The DE200 Series Corner Sleeve from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angle corner. The steel plate creates a diagonal bridge (16.5" wide) between the supporting surfaces, enabling the user to fully utilize the entire workstation. The user is now given access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The curved shape of the DE200 Series Corner Sleeve makes it most suitable for installations where a keyboard arm and tray will be deployed. The underside of the unit is pre-drilled to accommodate most common keyboard arms with no additional modifications required. The Corner Sleeve DE200 can be adjusted to fit desks from 1" to 1.5" thick. The DE250 model (available by Special Order) can adjust to fit desks between 1.5" and 2.5" in thickness.

Note: The curved shape and small dimensions of the DE200 Series Corner Sleeve are less than ideal for directly using a keyboard or mouse on it. There are several other larger products which are better suited to this purpose.

The DE400 Series Corner Sleeves from Humanscale can be used to create a usable workspace out of a tightly curved or inside right angled corner. The steel plate creates a diagonal bridge (23.25" wide) between the supporting surfaces, enabling the user to fully utilize the entire workstation. The user is now given access to an expanded work area (right, left and corner), enhancing the ergonomics of the workspace.

The large dimensions of the DE400 Series Corner Sleeve make it quite suitable for desk top keyboard and mouse positioning. The uniquely-shaped "wings" provide convenient mousing areas for both right and left-handed users. With a depth of 13.75" the DE400 Series Corner Sleeve will accept any common combination of keyboard and mousing device. It is also equally suited to keyboard arm and tray deployment as the underside of the unit is pre-drilled to accommodate most common keyboard arms with no additional modifications required. The DE400 Series Corner Sleeve is available in two models — the DE400 can be easily adjusted to fit desks from 1" to 1.5" thick while thicker desks (1.5" - 2.5" thick) can be accommodated by employing the DE450 which is available by Special Order.

Note: While the DE400 Series Corner Sleeve provides a bridging width of 23.25" the overall width of 38.5" does require a fair amount of desk surface for installation. If there are space restrictions it may be necessary to consider a similar product with a smaller overall footprint.