The DIADEM Waterfall Table Tops from ErgoVerse focus on functional organic form while offering a distinctive look to any office setting. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wraps the lamination film around the contoured edges, resulting in a fully sealed top. The satin-finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Waterfall Table Tops are finished with melamine to add further protection. The DIADEM Table Tops offer a uniquely practical and beautifying feature, a softly rounded inner waterfall edge for the dual grommet holes which permits cables to drop gently below the surface without risk of damage from the standard sharp edges.

DIADEM Waterfall Table Tops are 29" deep and available in 4 widths (46", 58", 70" and 82"), with 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) as well as 2 solid colours (Black and Grey).

Les DIADEM Waterfall Table Tops d'ErgoVerse se concentrent sur une forme fonctionnelle tout en offrant une allure distinctive à n'importe quel bureaux. Ces dessus de table (table top) ont un centre qui est construit de MDF d'un pouce épais, et sont usinés avec un profil de cascade élégant et des coins arrondis qui éliminent les points de pincement. Un film stratifié très robuste est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et aspiration enveloppe le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film stratifié satiné est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au centre du MDF. Les dessous de toute les tables DIADEM Waterfall Table Tops sont finis avec de la mélamine pour ajouter au protection. Les DIADEM Waterfall Table Tops offrent une fonctionnalité pratique très unique avec une caractéristique très jolie, un bord de cascade intérieure doucement arrondie pour les trous à double oeillet qui permet de laisser tomber doucement les câbles sous la surface sans risque de dommage fait par les bords standard qui sont typiquement pointu.

Les DIADEM Waterfall Table Tops sont de 29po de profondeur et sont disponibles en 4 largeurs (46po, 58po, 70po et 82po). Toutes les tailles sont disponibles en 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris).

The DIADEM Return Table Tops from ErgoVerse are intended as companion tops for the DIADEM Waterfall Table Tops. When added to a DIADEM Waterfall Table Top the combination of the two creates a traditional L-shaped desk with a 29" deep primary section and a 23" deep return. The DIADEM Return Table Tops can also serve as a stand-alone desk surface for those with less room. The DIADEM Return Table Tops retain the same focus on functional organic form and distinctive look as do the DIADEM Waterfall Table Tops. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wrap the lamination film around the contoured edges, resulting in a fully sealed top. The satin finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Return Table Tops are finished with melamine to add further protection.

DIADEM Return Table Tops are 23" deep and available in 2 widths (41" and 53"). Both sizes are available in the same 6 colours - 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) and 2 solid colours (Black and Grey) as the DIADEM Waterfall Table Tops.

Les DIADEM Return Table Tops d'ErgoVerse sont conçus pour être complémentaires pour les dessus de table Diadem Waterfall Table Tops. Lorsqu'il est ajouté à un dessus de table Diadem Waterfall Table Top, la combinaison des deux crée un bureau traditionnel en forme de L avec une section primaire 29 po de profondeur et un retour 23 po de profondeur. Les DIADEM Return Table Tops peuvent également servir de surface de bureau indépendant pour ceux qui ont moins d`espace. Les DIADEM Return Table Tops conservent le même accent sur la forme fonctionnelle et l'aspect distinctive que les DIADEM Waterfall Table Tops. Ces dessus de table (table top) ont un centre qui est construit de MDF d`un pouce épais, et sont usinés avec un profil de cascade et des coins arrondis qui éliminent les points de pincement. Un film robuste de stratifiés haute pression est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et d'enveloppe sous vide le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film stratifié satiné est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au MDF du centre. Les dessous de toute les tables DIADEM Return Table Tops sont finis avec de la mélamine pour ajouter au protection.

Les DIADEM Return Table Tops sont de 23 po de profondeur et sont disponibles en 2 largeurs (41 po et 53 po). Les deux tailles sont disponibles 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris) comme les DIADEM Waterfall Table Tops.

These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 23" deep, and range from 22" to 70" wide, and are designed for fixed width cubicles. This allows them to be easily integrated i.e. the 48-24S series is 46" x 23", and allows a 1" clearance space on three sides for cubicles designed for a 48" x 24" desktop. The tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management.

These tabletops provide a standard rectangular work surface which easily blends into most office settings and provides individuals with a familiar, conventional desktop. The work surfaces are all 29" deep, and range from 40" to 82" wide, and are designed for fixed width cubicles. This allows them to be easily integrated i.e. the 48-30S series is 46" x 29", and allows a 1" clearance space on three sides for cubicles designed for a 48" x 30" desktop. Two 8 cm grommet holes (one in each corner at the back of the top) assist in cable management. The tabletops are available in Beech or Black Melamine* with some sizes still available in Veneer* (on 0.875" thick MDF), with profiled lacquered rounded edges.
*Note: These tops are transitioning to a Melamine surface for the future but some sizes are still only available in the triple lacquered genuine Beech Wood Veneer. The specific model descriptions below indicate whether the product is Melamine or Veneer surface.

These tabletops provide a standard L-Shaped work surface which easily blend into most office settings and provide individuals with a familiar, conventional desk with return. The main work surface is 78.75" / 63.75" (200 cm / 160 cm) wide x 31.5" (80 cm) deep. The return side depth is 47.25" (120 cm) with the extended part of the return 23.625" (60 cm) deep. These tabletops are easily integrated into a cubicle or office workstation. The corner is rounded for the comfort of the user.

These tabletops are available in a Beech Veneer (on 0.875" thick MDF), and are Triple Coated with UV hardened lacquer with profiled lacquered rounded edges. Returns on the left and the right are available. A single grommet hole at the back of the tabletop (in the corner) assists in cable management.

The Omega Everest Table Top, part of iMovr's ThermoDesk line, features an innovative keyboard tray built directly into the surface of the table top. The new "SteadyType" keyboard tray helps reduce wrist extension and monitor shake at standing and walking workstations, and helps users of treadmill desks counter the 'backwards-pulling' effect of the treadmill.

Users moving to standing workstations and walking workstations can sometimes find it difficult to position the keyboard at a steep enough negative incline. The result is wrist extension, i.e. an upward bend at the wrist that can increase the risk of injury to the hands, wrists and forearms. The integrated, inset design of the "SteadyType" keyboard tray allows users to position the keyboard at steep negative inclines, from 0° to -85°.

Another issue for walking workstation users is the tendency to anchor the heels of the hands to the desk in an effort to keep their hands correctly positioned over the keyboard. This results in a constant, and significant strain on the muscles of the arms, shoulders and upper body. The greater degree of negative tilt offered by the "SteadyType" keyboard tray helps users more easily counter the backwards pulling effect of the treadmill. With the keyboard tray inclined at a steeper negative incline the backwards pull of the treadmill now works in the user's favour to hold the user's hands in position against the keyboard.

Both of the above issues are addressed by the SteadyType Keyboard Tray. The improved hand and wrist positioning enables users to maintain good walking posture while letting the muscles of the hands, forearms and upper body relax. This more natural posture will result in improved typing performance over standard 'flat-topped' walking workstations.

By integrating the "SteadyType" keyboard tray into the body of the table top and moving it closer to the centre of the desk top, iMovr has succeeded in significantly reducing the phenomenon known to users of height adjustable workstations as 'monitor shake'.

On the Omega Everest table top, the mouse sits on the primary desk surface but remains easily accessible within the Comfort Zone due to the unique positioning of the keyboard 'in' the desktop. The "SteadyType" keyboard tray has two height settings that enable the user to select the most beneficial positions for the keyboard and mouse relative to each other.

The 1 1/8" thick Omega Everest ThermoDesk Table Tops feature softly rounded edges and corners, vacuum-wrapped at high heat. The 3D Lamination process creates a seamless surface and the grommet hole interiors are perfectly covered and sealed. The worksurface has no sharp edges or square corners and is completely non-porous, helping to protect it from humidity and spilled liquids. Multiple layers of finish provide resistance to abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours, including Hayward Cherry, Clove Mahogany, Light Maple, Urban Walnut and others ensure the right tone in any office environment from entry level to senior executive.

The Omega Everest tops are pre-drilled to fit the iMovR Elite electric height-adjustable desk frame and are fitted with threaded metal inserts to ensure quick and measure-free installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points.

Note: Omega Everest tops may be installed on other sit-stand desk frames; however, the threaded inserts might not be useable. It will also be necessary to ensure that these frames do not interfere with the incline and height adjustment of the integrated SteadyType keyboard tray.

The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the Uptown Select Table Tops will compliment any office.

Uptown Table Tops feature dual 3" grommet holes and are equipped with threaded steel inserts for effortless installation on the iMovr UpStage 30 frames using a single Phillips screwdriver. The 47" and 59" tops will fit the UpStage 30 Narrow frame while the 71" and 83" tops are equipped to match the UpStage 30 Wide frames. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk Uptown Select tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The ThermoDesk ELITE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade ThermoDesk ELITE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr ELITE frame and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk ELITE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The Thermodesk ELLURE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products.

A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade Thermodesk ELLURE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr RELEVATE frame (formerly known as the Ellure) and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: Thermodesk ELLURE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

This tabletop is designed for corner applications as the rear of the top is square but rounded and will fit into any 90° corner. This compact corner worksurface provides a shallow front cutout for the user and enough real estate to allow the individual to access their full comfort zone with extra space to spare.

The longer sides at the back are 46.0625" long, with a total depth of 35.4375". The tabletop is available in a Maple or Beech Veneer (on 0.875" thick MDF), and is Triple Coated with UV hardened lacquer with profiled lacquered rounded edges.