The Wallaby Junior is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 24" wide and 18" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the platform can be elevated to a preset desired maximum height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

A single monitor is attached to a monitor mount (or bracket) using the standard VESA plates requiring 75 or 100 mm hole patterns. The monitor mount allows for panning, tilting, or rotating the monitor from landscape to portrait positions. Unlike the Kangaroo and Kangaroo Junior models, however, the Wallaby Junior is designed so that the monitor is set at a desired height relative to the keyboard platform and then stays locked in that relative position. The monitor will then always move in unison with the platform. There is a 7 inch height range to set the monitor to the desired position.

The Wallaby Junior is recommended for monitors up to 12 lbs (without stand attached). For heavier monitors, customized units can be special ordered upon request.

Available in black colour only. Additional accessories to extend the worksurface are also available.

Le Wallaby Junior est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (un serrage n`est pas requis) et est facilement déplacé à n`importe quelle position sur le bureau. La plateforme principale du clavier est ajustable en haut ou en bas avec  l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements rapidement facile et sans effort à travers de la journée. Cette plateforme est plus gros que les tablettes standard, de 24 po en largeur et 18 po de profondeur et peut être ajuster jusqu`à 16.5 po au-dessus du bureau. Avec le fonction d`un boulon d`arrêt, l`utilisateur peut monter la plateforme à une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Wallaby ont aussi un stabilisateur pour éliminer la vibration de la surface de travail.

Un seul moniteur est fixé sur un support de moniteur (ou crochet) en utilisant la plaque standard (un schéma de trous soit de 75 ou 100 mm) VESA (inclus). Ce support de moniteur permet l`ajustement de positionner le moniteur panoramique, inclinaison, rotation, position paysage ou position portrait (landscape or portrait). Par contre, contrairement aux modèles Kangaroo et Kangaroo Junior, le Wallaby Junior est conçu pour que l`utilisateur met le moniteur à l`hauteur préférable, et cela reste sécurer dans cette position relative au plateforme du clavier, c`est-à-dire le moniteur va toujours bouger avec la plateforme. Il y a une gamme d`hauteur de 7 po d`ajustement pour établir cette distance initial. 

Le Wallaby Junior est recommandé pour les moniteurs qui pèsent jusqu`à 12 livres (sans la base attachée). Pour les moniteurs plus lourds des modèles personnalisés peuvent être commandés sur demandes.

Disponible en couleur Noir seulement. Des accessoires supplémentaires pour étendre la surface de travail sont aussi disponible.

The Kangaroo Junior is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 24" wide and 18" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the platform can be elevated to a preset desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

An independently adjustable shelf unit is also provided with the Kangaroo Junior to support either a single monitor with its stand attached or a laptop. This shelf unit has a 6.5" range of adjustment relative to the main keyboard platform. It also has its own gas cylinder mechanism and tightening knob (or "monitor brake").

The Kangaroo Junior is a smaller version of the Kangaroo and is recommended for monitors up to 12 lbs. For heavier monitors, customized units can be special ordered upon request.

Available in black colour only. Additional accessories to extend the worksurface are also available.

Le Kangaroo Junior est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (un serrage n`est pas requis) et facilement déplacé à n`importe quelle position sur le bureau. La plateforme principale de clavier est ajustable avec l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements en haut ou en bas rapidement et facilement. Cette plateforme est plus gros que les tablettes standard, de 24 po en largeur et 18 po de profondeur, et peut être ajustée jusqu`à 16.5 po au-dessus du bureau. Avec le fonction d`un boulon d`arrêt, l`utilisateur peut augmenter la plateforme d`une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Kangaroo ont aussi un stabilisateur pour réduire la vibration de la surface de travail.

Une étagère ajustable indépendamment est aussi fournit avec le Kangaroo Junior pour supporter l`un l`autre un seul moniteur avec sa base attachée, ou un ordinateur portable. Ce module en étagère a une gamme d`ajustement de 6.5 po par rapport à la plateforme de clavier. Il a aussi son propre vérin à gaz (gas cylinder mechanism) aussi qu`un bouton de serrage (ou "un frein de moniteur").

Le Kangaroo Junior est un modèle plus petit que le Kangaroo et est recommandé pour un moniteur qui pèse jusqu`à 12 livres (avec la base attachée). Pour les moniteurs plus lourds, des modèles personnalisés peuvent être commandés sur demande.

Le Kangaroo Junior est disponible en Noir seulement. Des accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The Kangaroo Pro Junior is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 24" wide and 18" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the platform can be elevated to a preset desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

A single monitor is attached to a monitor mount (or bracket) using the standard VESA plates requiring 75 or 100 mm hole patterns. The monitor mount allows for panning, tilting, or rotating the monitor from landscape to portrait positions. In addition, the monitor can also be height-adjusted independent of the keyboard platform using a separate gas cylinder mechanism with a vertical range of 6.5").

The Kangaroo Pro Junior is a smaller version of the Kangaroo Pro and is recommended for monitors up to 12 lbs (without stand attached). For heavier monitors, customized units can be special ordered upon request.

Available in black colour only. Additional accessories to extend the worksurface are also available.

Le Kangaroo Pro Junior est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (serrage n`est pas requis) et facilement déplacer à n`importe position sur le bureau. La plate-forme principal de clavier ajuste en haut ou en bas avec de l`aide d`un vérin à gaz (gas cylinder or lift) en faisant des ajustements vite faites durant la journée facilement et sans éffort. Cette plate-forme est plus gros que les tablettes standard, de 24 po en largeur et 18 po de profondeur et peut être ajuster jusqu`à 16.5 po au-dessus du bureau. Avec la caractéristique d`un boulon d`arrêt, l`utilisateur peut monter la plate-forme à une hauteur préférer prédéfini chaque fois. Toutes modèles de Kangaroo a aussi un stabilisateur pour pratiquement éliminer la vibration de la surface de travail.

Un seul moniteur est fixé sur un support de moniteur (ou crochet) en utilisant la plaque standard VESA, qui exige un schéma de trous soit de 75 ou 100 mm. Ce support de moniteur permet l`ajustement de positionner le moniteur panoramique, inclinaison, rotation, position paysage ou position portrait (lanscape or portrait). En plus, le moniteur peut aussi être ajusté en hauteur indépendant de la plate-forme qui utilise un vérin à gaz (gas cylinder mechanism) séparé avec une gamme verticale de 6.5 po.

Le Kangaroo Pro Junior est plus petit que le Kangaroo Pro et est recommandé pour les moniteurs qui pèsent jusqu`à 12 livres (sans la base attachée). Pour les moniteurs plus lourdent, des modèles personnalisés peuvent être commandés (commande spéciale) sur demande.

Disponible en noir seulement. Accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The Dual Kangaroo is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 28" wide and 24" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the workstation platform can be elevated to a preset maximum desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

Two independently adjustable shelf units are also provided with the Dual Kangaroo to support either two monitors with their stands attached or two laptops (or a combination of monitor and laptop). This shelf unit has a 6.5" range of adjustment relative to the main keyboard platform. It also has its own gas cylinder mechanism and tightening knob (or "monitor brake").

The Dual Kangaroo is recommended for monitors or laptops up to 10 lbs each (with stands attached). For heavier monitors, customized units can be special ordered upon request.

Available colour options include Black, Cherry, and Maple. Additional accessories to extend the worksurface are also available.

Le Dual Kangaroo est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (un serrage n`est pas requis) et facilement déplacé à n`importe quelle position sur le bureau. La plate-forme principale de clavier est ajustable avec l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements en haut ou en bas rapidement et facilement. Cette plate-forme est plus gros que les tablettes standard de 28 po en largeur et 24 po de profondeur, et peut être ajustée jusqu`à 16.5 po au-dessus du bureau. Avec le fonction d`un boulon d`arrêt, l`utilisateur peut augmenter la plate-forme d`une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Kangaroo ont aussi un stabilisateur pour réduire la vibration de la surface de travail.

Deux étagères ajustables indépendamment sont aussi fournit avec le Dual Kangaroo pour supporter l`un l`autre deux moniteurs avec leurs bases attachées, ou deux ordinateurs portables (ou une combinaison d`un moniteur et un ordinateur portable). Ce module en étagère a une gamme d`ajustement de 6.5 po par rapport à la plate-forme principale de clavier. Il a aussi son propre vérin à gaz (gas cylinder mechanism) aussi qu`un bouton de serrage (ou "un frein de moniteur").

Le Dual Kangaroo est recommandé pour les moniteurs ou ordinateurs portables qui pèsent jusqu`à 10 livres chacun (avec les bases attachées). Pour les moniteurs plus lourdent, des modèles personnalisées peuvent être commandés sur demande.

Disponibles en noir, rouge cerise, et en érable. Accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The DeskRite 100 Sit-Stand Platform from Posturite can be used to convert almost any standard fixed-height desk into a sit-stand desk. The DeskRite 100 lifts directly out of the box and onto the desk and in seconds the conversion is complete. There is generally no need to modify the existing desk space with the possible exception of overhead cabinets. The DeskRite 100 offers keyboard height adjustment from 0.6" to 15.6" above the mounting surface height - with a total of 40 increments to choose from. The upper work surface is positioned 4" higher than the keyboard tray and moves in concert with the height adjustment. Monitors can be placed directly on the work surface or monitor arms may be mounted to offer a greater range of adjustment.

The DeskRite 100 has two unique features not commonly available in other similar products. The first is that the lifting tension is adjustable via dual front-mounted dials. This means operators are able to fine tune the lifting capacity to match the weight of the documents and peripherals that are in use. For example, if they happen to have a heavy binder on the surface they can increase the tension to ensure that it requires minimal effort to raise the worksurface. The second feature is a sliding keyboard tray that stores back into the unit when not in use. This feature ensures a greater stability for the DeskRite 100 than other solutions which cantilever up and out from the desk when raised for standing. In the case of the DeskRite 100 only the tray moves out, leaving the main unit safely centered on the desk. It is also an alternative to those solutions which, although they do not cantilever outwards, have a keyboard that is fixed and therefore always extends out from the desk.

The maximum lifting capacity for the DeskRite 100 is 40 pounds, easily sufficient for any standard office application, even with multiple monitors mounted. The 35" x 24" upper worksurface offers plenty of space for documents and the 26" x 11" keyboard tray will accommodate most standard keyboard and mouse combinations.

The Winston Workstation Single from Innovative is a height-adjustable sit-stand add-on unit that can be deployed on almost any standard height fixed desk, converting it for sitting, leaning or standing. This all-in-one unit can elevate a keyboard, mouse, and other desk accessories, including a single monitor, to whatever standing height is needed (up to 18.0" above desk height for the keyboard platform; up to 37.6" above desk height to the middle of the monitor).

The keyboard platform (30" W x 23" D) and monitor mount move as one unit for height adjustment* to ensure that the monitor is appropriately positioned as working positions change throughout the day. The Winston uses a heavy metal base to stabilize the unit so that it can be positioned anywhere on the surface without having to clamp or bolt it to the desk. The release lever built into the keyboard platform on the right side, releases the lock so the platform, supported by a gas spring, can be moved up or down as desired with minimal effort.

*NOTE: The monitor height relative to the keyboard platform is set when the unit is assembled and is not intended to be adjusted on-the-fly while in use. However, should such a change be required, it can be readjusted by disassembling the monitor clamp and reassembling at a different height.

Le Winston Workstation Single d`Innovative est un produit assis-debout réglable en hauteur qui transforme presque n'importe quel bureau assis-seulement en bureau assis-debout. Cette unité tout-en-un permet d'élever un clavier, une souris ou d`autres accessoires de bureau, y compris un seul moniteur, à la hauteur nécessaire pour se tenir debout (jusqu`à 17po au-dessus du bureau pour la plateforme du clavier; et jusqu`à 40po au dessus du bureau à partir du milieu du moniteur).

La plateforme du clavier (30po Largeur x 18po Profondeur) et le support de l'écran (100 x 100 mm compatible avec VESA) se déplace ensemble en un morceau pour l`ajustement de la hauteur* pour assurer une hauteur optimale, que ça soit pour assis ou debout. Le Winston utilise une base en métal lourd pour stabiliser l'unité de manière à ce qu'elle puisse être positionnée n'importe où sur le bureau sans avoir besoin de la faire fixer à pince ou avec boulon. Il y a également un mécanisme de dégagement intégré dans la plateforme du clavier sur le côté droit, qui libère un verrou, de sorte que la plateforme peut ensuite être déplacée sans effort vers le haut ou vers le bas, selon les besoins.

*Veuillez noter: La hauteur du moniteur par rapport à la plateforme du clavier est ajuster lorsque l`unité est assemblée. Il n`est pas conçu à être ajustée vite fait, sans effort, pendant l`utilisation. Elle peut être réajustée en démontant la pince du moniteur et en la remontant à la hauteur nécessaire.

The Taskmate EZ from HealthPostures is available in two models. The Computer Workstation version includes both an adjustable height work surface and monitor mount. The Surface version does not include the monitor mount but can be used as to elevate a laptop for short term use. The Surface version can also serve well as an adjustable assembly or work surface in industrial applications were individuals of varying height may utilize workstations. Taskmate EZ units are equipped by default with a thru-mount that bolts through the surface of the fixed height desk using a single hole. There is also a clamp mount accessory available that can be used to mount the Taskmate EZ to desks no deeper than 24". Both the work surface as well as the monitor height are independently reconfigurable by physically lifting and moving the unit from one notch to another, providing configuration options in 1.5" increments. The monitor can be attached to any of 14 notches in the vertical column, providing a range of height between keyboard tray and the middle of the monitor of a minimum of 13" and a maximum of 31.5".

The Taskmate EZ is capable of supporting up to 50 pounds, and provides the ability to set the monitor (at its midpoint) from 15" to 33" above the mounting surface. The work surface can be positioned from 2" to 20" above the mounting surface when being used with the monitor support and up to 33" above the mounting point when used without a monitor. The work surface provides an 18" deep x 23.5" wide area for the keyboard, mouse and papers. In idustrial settings it can serve to position tools and equipment at a range of heights. The monitor mount will accommodate monitors with either 75mm and 100mm VESA patterns. Some assembly is required (approximately 5-10 minutes).

The WorkFit-S clamps onto the front edge of a standard desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray, upper worksurface and monitor through the range of motion. The overall vertical adjustment range is 18", and the monitor mount can be independently adjusted through an additional 4.8" range. The mounting surface must be between .47" and 2.4" thick for the clamp to function, and the monitors must be between 6 and 14 lbs (no greater than 28 lbs total). For optimal viewing comfort monitors can be deployed at a 3° or 8° upward angle. The keyboard tray is 27" wide x 9" deep x 0.25" high, can adjust to a 7.5° negative inclination, and can support a maximum weight of 5 lbs. It can be mounted at 3 different depths which provides a 3" range of adjustment and in addition can also be positioned to either the right or left in order to centrally position the keyboard in front of the monitors. The upper worksurface is 23" wide x 15" deep x 0.25" high, with a maximum load capacity of 5 lbs.

The Dual version is designed to support monitor sizes up to 24.5" physical width and between 6 & 12 lbs. Total combined weight load (including Worksurface, Keyboard and Monitor loads) should not exceed 25 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.

The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray, upper worksurface and monitor through the range of motion. The overall vertical adjustment range is 18", and the monitor mount can be independently adjusted through an additional 4.8" range. The mounting surface must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 6 and 16 lbs for the LCD pivot (10° down to 20° up) to function correctly. The keyboard tray is 27" wide x 9" deep x 0.25" high, can adjust to a 7.5° negative inclination, and can support a maximum weight of 5 lbs. It can be mounted at 3 different depths which provides a 3" range of adjustment and in addition can also be positioned to either the right or left in order to centrally position the keyboard in front of the monitor. The upper worksurface is 23" wide x 15" deep x 0.25" high, with a maximum load capacity of 5 lbs.

The LD version is designed to support monitor sizes up to 24" diagonal and between 6 and 16 lbs. Total combined weight load (including Worksurface, Keyboard and Monitor loads) should not exceed 18 lbs. For monitor sizes larger than 24" diagonal or total weight loads greater than 18 lbs. the HD version of this product may be an option.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.

The WorkFit-S clamps on to the front edge of your desk and uses the Ergotron's Constant Force spring lift mechanism to assist in moving the keyboard tray, upper worksurface and monitor through the range of motion. The vertical adjustment range is 18", and the monitor mount supports independent vertical adjustment through an additional 4.8" range. The mounting surface must be between .47" and 2.4" thick for the clamp to function, and the monitor must be between 16 and 28 lbs for the LCD pivot (10° down to 20° up) to function correctly. The keyboard tray is 27" wide x 9" deep x 0.25" high, can adjust to a 7.5° negative inclination, and can support a maximum weight of 5 lbs. It can be mounted at 3 different depths which provides a 3" range of adjustment and in addition can also be positioned to either the right or left in order to centrally position the keyboard in front of the monitor. The upper worksurface is 23" wide x 15" deep x 0.25" high, with a maximum load capacity of 5 lbs.

This HD model is designed to accommodate monitor sizes up to 30" and weighing between 16 and 28 lbs can handle a maximum combined weight load (including monitor, worksurface and keyboard loads) of 29 lbs.

NOTE: It is recommended to strengthen the mounting point to prevent damage to the desktop.