The Thermodesk ELLURE Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products.

A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the commercial grade Thermodesk ELLURE Table Tops will provide the right tone in any office environment--from entry level to the most senior executive.

The table tops are pre-drilled to fit the iMovr RELEVATE frame (formerly known as the Ellure) and are fitted with threaded metal inserts that ensure quick and easy installation with a single Phillips screwdriver. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: Thermodesk ELLURE tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The ThermoDesk Upsilon Table Tops from iMovR are constructed with 3/4" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. Finishes available include Hayward Cherry, Clove Mahogany and Light Maple woodgrains or Black, Shark Grey and Designer White solid colours. This attention to the details of construction and finish ensure that the Upsilon Table Tops will compliment any office.

ThermoDesk Upsilon table tops have dual 2.35" grommet holes and are pre-drilled to fit the iMovR UpStage 24 frame for simplified installation. (Note: ThermoDesk Upsilon tops can be installed on other sit-stand desk frames but the predrilled holes may not be usable in those applications.)

The ThermoDesk Uptown Select Table Tops from iMovr are constructed with 1 1/8" thick high-density MDF cores, machined with softly rounded edges and corners. The finish is 3D vacuum laminated at high heat with the resulting laminate finish fully wrapped around the top, the sides, and the grommet hole interiors in one complete and seamless film. This process ensures a fully sealed, non-porous surface that protects against damage caused by humidity and exposure to liquids. Multiple layers of finish provide additional resistance against abrasion and damage from many common cleaning and disinfectant products. A wide palette of colours is available, including Hayward Cherry, Clove Mahogany, Light Maple and Urban Walnut. This attention to the details of construction and finish ensure that the Uptown Select Table Tops will compliment any office.

Uptown Table Tops feature dual 3" grommet holes and are equipped with threaded steel inserts for effortless installation on the iMovr UpStage 30 frames using a single Phillips screwdriver. The 47" and 59" tops will fit the UpStage 30 Narrow frame while the 71" and 83" tops are equipped to match the UpStage 30 Wide frames. The metal inserts ensure a well-secured top as well as the ability to remove and replace tops without wear on the mounting points. (Note: ThermoDesk Uptown Select tops can be installed on other sit-stand desk frames but the threaded inserts may not be useable in those applications.)

The KINETIC Sit-Stand Perching Stool is a strikingly elegant and contemporary seating option for a sit-to-stand workstation. The base is engineered to provide a stable, extra wide seating surface for those up to 275 lbs, supported by a gas spring cylinder that provides shock-absorbent comfort through the full range of adjustment (26” to 32”). A convenient 20° swivel to the right or left supports one over a wider radius of movement than a fixed seat could offer.

Semi-Aniline leather or Fabric upholstery with foam underpadding covers the entire extra-wide (19.25” Wide x 8.25 Deep) surface of the seat The aluminum base is powder coated Black or Silver, ensuring that it will fit into any office décor, and has large, reversible plastic glides to suit either hard or carpeted floors.

The Kangaroo is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 28" wide and 24" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the user can raise the platform to a preset desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

An independently adjustable shelf unit is also provided with the Kangaroo to support either a single monitor with its stand attached or a laptop. This shelf unit has a 6.5" range of adjustment relative to the main keyboard platform. It also has its own gas cylinder mechanism and tightening knob (or "monitor brake").

The Kangaroo is recommended for monitors up to 15 lbs (with stand attached). For heavier monitors, customized units can be special ordered upon request.

Available colour options include Black, Cherry, and Maple. Additional accessories to extend the worksurface are also available.

Le Kangaroo est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pied (un serrage n`est pas requis) et peut être facilement déplacé à n`importe quelle position sur le bureau. La plate-forme principale du clavier est ajustable avec l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements en haut ou en bas rapidement et facilement. Cette plate-forme est plus grosse que les tablettes standard, de 28 po en largeur et 24 po de profondeur, et peut être ajustée jusqu`à 16.5 po au-dessus du bureau. Avec la fonction d`un boulon d`arrêt, l`utilisateur peut augmenter la plate-forme d`une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Kangaroo ont aussi un stabilisateur pour réduire la vibration de la surface de travail.

Une étagère ajustable indépendamment est aussi fournit avec le Kangaroo pour supporter l`un l`autre un seul moniteur avec sa base attachée, ou un ordinateur portable. Ce module en étagère a une gamme d`ajustement de 6.5 po par rapport à la plate-forme de clavier. Il a son propre verin à gaz (gas cylinder mechanism) aussi qu`un bouton de serrage (ou "un frein de moniteur").

Le Kangaroo est recommandé pour un moniteur qui pèse jusqu`à 15 livres (avec la base attachée). Pour les moniteurs plus lourds, des modèles personnalisés peuvent être commandés sur demande.

Le Kangaroo est disponible en noir, en rouge cerise, et en érable. Des accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The Dual Kangaroo is an adjustable height desk which converts any ordinary desk into a sit-stand desk. It is free-standing (no clamping required) and easily moved to any position on the desk. The main keyboard platform adjusts up or down with the assistance of a gas cylinder (or lift), making quick adjustments throughout the day easy and effortless. This platform is generous compared to most keyboard trays at 28" wide and 24" deep and can be adjusted up to 16.5" above the desk. With the "stopping bolt" feature, the workstation platform can be elevated to a preset maximum desired height every time. All Kangaroo models also include a stabilization leg to practically eliminate worksurface vibration.

Two independently adjustable shelf units are also provided with the Dual Kangaroo to support either two monitors with their stands attached or two laptops (or a combination of monitor and laptop). This shelf unit has a 6.5" range of adjustment relative to the main keyboard platform. It also has its own gas cylinder mechanism and tightening knob (or "monitor brake").

The Dual Kangaroo is recommended for monitors or laptops up to 10 lbs each (with stands attached). For heavier monitors, customized units can be special ordered upon request.

Available colour options include Black, Cherry, and Maple. Additional accessories to extend the worksurface are also available.

Le Dual Kangaroo est un bureau ajustable en hauteur qui transforme n`importe quel bureau ordinaire en bureau assis-debout. Il est sur pieds (un serrage n`est pas requis) et facilement déplacé à n`importe quelle position sur le bureau. La plate-forme principale de clavier est ajustable avec l`aide d`un verin à gaz (gas cylinder or lift). Cette fonctionnalité permet aux utilisateurs de faire des ajustements en haut ou en bas rapidement et facilement. Cette plate-forme est plus gros que les tablettes standard de 28 po en largeur et 24 po de profondeur, et peut être ajustée jusqu`à 16.5 po au-dessus du bureau. Avec le fonction d`un boulon d`arrêt, l`utilisateur peut augmenter la plate-forme d`une hauteur préférée prédéfinie chaque fois. Toutes les modèles de Kangaroo ont aussi un stabilisateur pour réduire la vibration de la surface de travail.

Deux étagères ajustables indépendamment sont aussi fournit avec le Dual Kangaroo pour supporter l`un l`autre deux moniteurs avec leurs bases attachées, ou deux ordinateurs portables (ou une combinaison d`un moniteur et un ordinateur portable). Ce module en étagère a une gamme d`ajustement de 6.5 po par rapport à la plate-forme principale de clavier. Il a aussi son propre vérin à gaz (gas cylinder mechanism) aussi qu`un bouton de serrage (ou "un frein de moniteur").

Le Dual Kangaroo est recommandé pour les moniteurs ou ordinateurs portables qui pèsent jusqu`à 10 livres chacun (avec les bases attachées). Pour les moniteurs plus lourdent, des modèles personnalisées peuvent être commandés sur demande.

Disponibles en noir, rouge cerise, et en érable. Accessoires supplémentaires pour étendre la surface de travail sont aussi disponibles.

The 501-49 3-Leg Height Adjustable Base from Conset is designed for those who need an L-shaped desk and prefer no lower crossbars between the upright legs. Elegant and stylish in appearance, a simple touch of a button will raise or lower the entire workstation - offering easy freedom to change working posture throughout the workday. The distinctive tubular leg design enabled the removal of the usual lower traverse crossbar without any sacrifice in the stability of the frame. The result is a clean, contemporary, open design with nothing to interfere with leg movement. Black or silver frame colours are completed with chromed steel telescoping inner legs for a unique look. An expanding upper bracket permits 4" incremental width changes from a minimum of 45.6125" to a maximum width of 69.25" along the main bracket and 53" to 76.625", making the 501-49 versatile enough to accommodate a wide range of table top sizes. For those seeking a quieter unit, the 501-49 is also substantially quieter than most other current Conset bases (i.e. 501-27, etc.).

This design also yields an increased upper range - permitting the frame to elevate from 24.75" to 48.375" at a rate of up to 1.26"/second. The lower range is slightly higher than other frames but at 24.75" is generally acceptable for all except the shortest of individuals.

Suited for a wide range of table tops, the 20" deep upper bracket supports make the 501-49 ideal for most desktops and lifting up to 198 lbs. It will not, however, work with tops shallower than a nominal 21" depth.