Sit-Stand / Lean

Accessories

Anti-Fatigue Mats

Components

Electric Solutions

Manual Solutions

Retrofit - Clamp

Retrofit - Freestanding

Seating

Table Tops

Walking Solutions

CLEARANCE SIT-STAND

Search By:
ErgonomicDistribution.com Online Product Catalog - Sit-Stand Solutions - Components - Product Information

Components

1 2 >


Ergo Flex Phone Arm

by Aidata



Telephones are often placed at the rear of a desk because of the need to have papers and other items in close proximity. However, the result is that individuals are then required to reach to the back of the desk each time they make or answer a call. ...



Telephones are often placed at the rear of a desk because of the need to have papers and other items in close proximity. However, the result is that individuals are then required to reach to the back of the desk each time they make or answer a call. For many this can result in repetitive overreaching. The Ergo Flex Phone Arm from Aidata is designed to reduce or eliminate this overreaching by permitting the phone to be brought forward (or up) into a position that brings it within the comfort zone. When extended forward to the maximum reach of 24" the phone sits about 6" above the desk surface, leaving the desk space free for papers or other equipment. The phone can also be raised up to 16" above the mounting clamp but does move away from the individual as it rises. The elevated positions can be of value where sit-stand retrofits are in use by facilitating elevation of the phone to be within reach while standing or leaning. The 8" x 9.5" platform is equipped with an adjustable (5" - 9" width) spring clip that will fit most phones and tilts up to 60° for easier access and viewing. The arm is also able to rotate a full 360° from the mounting point and includes built-in phone cable management.



Les téléphones sont souvent placés à l'arrière d'un bureau parce qu'il est nécessaire d'avoir des papiers et d'autres objets à proximité. Cependant, il en résulte que les personnes doivent tendre la main vers l'arrière du bureau chaque fois que la personne passent ou répond à un appel. Pour beaucoup de gens, cela peut entraîner des efforts répétitifs. L'Ergo Flex Phone Arm d'Aidata est conçu pour réduire ou éliminer ces efforts excessifs en permettant au téléphone d'être avancé (ou relevé) dans une position qui le place dans la zone de confort. Lorsque l'Ergo Flex Phone Arm est déployé vers l'avant jusqu'à la portée maximale de 24po, le téléphone se trouve à environ 6po au-dessus de la surface du bureau, laissant l'espace libre pour les papiers ou autres équipements. Le téléphone peut également être élevé jusqu'à 16po au-dessus de la pince de fixation, mais il s'éloigne de la personne lorsqu'il s'élève. Les positions surélevées peuvent être utiles en cas d'utilisation d'un système assis-debout, car elles permettent d'élever le téléphone pour qu'il soit à portée de main en position debout ou penchée. La plateforme de 8po x 9.5po est équipée d'une pince à ressort ajustable (largeur de 5-9po) qui s'adapte à la plupart des téléphones et s'incline jusqu'à 60° pour faciliter l'accès et la visualisation. Le bras est également capable de pivoter sur 360° à partir du point de montage et comprend un système intégré de gestion des câbles téléphoniques.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
TA002BBlack model





Raise-Its

by Headwind Consumer Products



Raise-It furniture risers, by Headwind Consumer Products, provide an easy, inexpensive and safe way to increase the height of office and household furniture for increased ergonomic benefit and improved comfort. Another common use is to elevate furnit ...



Raise-It furniture risers, by Headwind Consumer Products, provide an easy, inexpensive and safe way to increase the height of office and household furniture for increased ergonomic benefit and improved comfort. Another common use is to elevate furniture or materials in basements or storage to protect them from moisture damage.

Raise-Its™ are four inches square and one inch high and constructed of sturdy black or clear polycarbonate plastic. They feature a series of nested depressions in the centre that create a stable base for a wide range of round and square furniture legs, board-style desks, as well as bed wheels of different sizes. Raise-It risers are designed to interlock and can be safely stacked up to 3-high for a total of three additional inches in height. Raise-Its are also strong, rated to support up to 600 lbs per supported leg.

Included with each pack of 8 Raise-Its are four non-skid rubber inserts to ensure a stack of Raise-Its remains in place on tile or wood floors. (Additional anti-skid inserts can be purchased separately.)



Les élevations meuble(furniture risers) nommé Raise-It, par Headwind Consumer Products, offre une manière facile, économique et sauf pour augmenter la hauteur des meubles au travail et à la maison pour améliorer les avantages ergonomiques et le confort. Une autre utilisation commune est pour élever les meubles ou matériaux dans le sous-sol ou dans un espace de rangement pour protèger contre le dommage d`humidité.

Raise-Its™ sont 4 pouces carrés et 1 pouce de haut, construit d`un plastique polycarbonate robuste en couleur noir ou claire. Les caractéristiques sont des creux emboîtés dans le centre qui fournis une base stable pour une gamme de pieds de meubles carrés et ronds, bureaux dans la salle de conférence, aussi que les roulettes de différentes tailles sur un lit. Les élevations Raise-It sont construit pour s`imbriquer et peuvent être empilés sans danger jusqu`à 3 haut pour une hauteur total de 3 pouces additionnel. Les Raise-Its sont aussi fort, évalués pour soutenir jusqu`à 600 livres par pieds soutenu.

Inclus dans chaque boîte de 8 Raise-Its sont 4 inserts en caoutchouc antidérapantes pour assurer qu`une pile de Raise-Its reste en place sur les planchers en tuile ou en bois.(Des inserts en caoutchouc antidérapantes supplémentaire peuvent être achetés séparément.)



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
RI-CLRClear, box of 8
RI-BLKBlack, box of 8
Accessories
Model #DescriptionSynnex SKU
820-0459 1 Anti-skid Pad





Ovation Sit-Stand Keyboard Arm

by KV Waterloo



The Ovation Sit-Stand Keyboard Arm by KV Waterloo offers a range of height adjustments to accommodate sit-stand workstations. Using a patented "Lift N Lock" counterbalance mechanism the arm allows an attached keyboard tray to be positioned at heights ...



The Ovation Sit-Stand Keyboard Arm by KV Waterloo offers a range of height adjustments to accommodate sit-stand workstations. Using a patented "Lift N Lock" counterbalance mechanism the arm allows an attached keyboard tray to be positioned at heights ranging from 8.4" above the mounting point to 5.6" below it. The 23" storage track enables most keyboard trays to be fully stored beneath the desk when not in use. The curved neck (see the first image on the Detailed Specifications page for an illustration) allows individuals to be comfortably close to the desk when seated and when standing.

All Ovation Keyboard Arms include a low profile mounting plate for the keyboard tray. The mounting plate is connected to a "Direct Drive" dial tilt mechanism that includes an inclination gauge. By simply turning the dial, and watching the inclination gauge, one can easily set up their workspace to position their keyboard at the preferred inclination, from a positive inclination of +10° to a flat 0° to a negative inclination of -15°.

To view Keyboard Trays, please see our Tray Category

NOTE: On a standard 28.5" high desk (measured from the underside of the desk), the Ovation Sit-Stand Keyboard Arm will provide enough height for proper "standing" positioning of the keyboard tray with no inclination for those under 5'5". For individuals standing between 5’5” and 5’7”, this product can still be suitable but will require a negative inclination on the tray (which brings up the tray worksurface accordingly). This arm is also suitable for individuals under 5’ 7” who are using a “lean-into” seat which puts them in a position between sitting and standing. If negative inclination on the tray is acceptable, those between 5’ 7” and 5’ 10” may also be able to use this product to meet their needs. Taller persons may be accommodated by raising the mounting height through use of products such as the Raise-Its. Of course, monitor elevation must also be considered when moving to a standing position.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
8674D23Ovation Sit-Stand Keyboard Arm, Steel Ball-Bearing Track





Duet Sit-Stand Arm

by KV Waterloo



The Duet Sit-Stand Arm can be employed to create a sit-stand workstation suitable for a wide range of heights. It is able to be lowered a full 6.5" below and raised to 12.5" above the mounting point.

The Duet Sit-Stand Arm features a convenien ...



The Duet Sit-Stand Arm can be employed to create a sit-stand workstation suitable for a wide range of heights. It is able to be lowered a full 6.5" below and raised to 12.5" above the mounting point.

The Duet Sit-Stand Arm features a convenient tilt control release permitting ±15° of worksurface adjustment and a field adjustable coil spring which adjusts for load counter balance. Height adjustment is easily accomplished by using the T-pull release to disengage the lock, then raising or lowering the tray to the desired working height. The slim (only 0.75" wide) dual arm (with crossbar) design ensures that the knees and legs have plenty of room - and far more than any single central support arm. The Duet Sit-Stand Arm is available in four widths, each offering progressively more width between the tray support arms. For optimal workspace and knee clearance the wider models are generally recommended unless there are space restrictions.

The Duet Sit-Stand Arm easily accommodates custom-built trays or you may choose to select the appropriate Duet Arm Custom Tray to create a complete sit-stand workstation. The 39" tray is wide enough for a keyboard, mouse, phone and notepad - a complete desk available for use while sitting or standing.

When installed on an average height, 1" thick worksurface (28.5" from the floor to the underside of the desk), this arm can elevate an attached tray to 41". By taking advantage of the negative inclination option and angling the front edge of the tray upwards, the potential height range can be extended slightly higher (42" - 43"). Note: For taller individuals it may be possible to achieve greater elevation by employing a product such as RaiseIts to raise the desk, thereby raising the mounting point. If this is not practical there are many other options available to create sit-stand workstations for taller persons.

While the Duet Sit-Stand Arm does offer a wide range of height adjustment, it accomplishes this with the sacrifice of storability. If the ability to store the tray below the desk is necessary there are other options which may be suitable. Please call and speak with a Customer Service Representative should this be the case.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
7080DT2300Accommodates a 23" keyboard tray
7080DT2700Accommodates a 27" keyboard tray
7080DT3100Accommodates a 31" keyboard tray
7080DT3900Accommodates a 39" keyboard tray





Duet Arm Custom Tray

by Fox Bay Industries



The Duet Arm Custom Tray from Fox Bay Industries is 12" deep, features a low profile of just 0.375" and is available in widths of 39", 31", 27" and 23". The ABS Plastic tray is fitted with a 1" Keyboard Guard that has convenient cable routing cutouts ...



The Duet Arm Custom Tray from Fox Bay Industries is 12" deep, features a low profile of just 0.375" and is available in widths of 39", 31", 27" and 23". The ABS Plastic tray is fitted with a 1" Keyboard Guard that has convenient cable routing cutouts on both the left and right. It is otherwise free of any obstructions such as raised edges or built-in wrist rests that could increase the risk of injury to the sensitive pressure points on the underside of the wrists.

The Duet Arm Custom Trays are predrilled to fit both the Duet Sit-Stand Arm and the Duet Sit-Stand Storable Arm from KV Waterloo. When paired with these arms the Duet Custom Trays provide durable deeper-than-average rigid work surface which can provide support for virtually any combination of keyboard and mousing input device. The larger 31" and 39" wide trays can even provide space for additional devices or for notetaking.

Note: The Duet Arm Custom Trays are ONLY for use with Duet Arms from KV Waterloo. Mounting holes are pre-drilled for both arm supports as well as the release trigger. Ensure that the arm width matches the width of tray desired.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
FB-T39-DUETDuet Arm Custom Tray - 39" W x 12" D
FB-T31-DUETDuet Arm Custom Tray - 31" W x 12" D
FB-T27-DUETDuet Arm Custom Tray - 27" W x 12" D
FB-T23-DUETDuet Arm Custom Tray - 23" W x 12" D





NewLife Eco-Pro Anti-Fatigue Mats

by Lets Gel, Inc.



The NewLife Eco-Pro Anti-Fatigue Mats by Lets Gel provide users with the ideal balance of comfort and support for standing applications. The 0.75" thick mats feature a proprietary commercial grade Cellulon Polyurethane Technology which can handle the ...



The NewLife Eco-Pro Anti-Fatigue Mats by Lets Gel provide users with the ideal balance of comfort and support for standing applications. The 0.75" thick mats feature a proprietary commercial grade Cellulon Polyurethane Technology which can handle the heavy usage of a workplace environment without losing resiliency (i.e. bottoming out, fatiguing or collapsing over time). The mats are stain and puncture resistant, have anti-microbial properties, and feature eco-friendly construction employing Bio-Foam—a renewable plant based resource.

The high degree of cushioning or "bounce" which Eco-Pro mats provide can reduce spinal compression and reduce or prevent discomfort in the feet, legs and lower back. In addition, the movement which the mats encourage can also aid in encouraging flexing of the calf muscles which can result in improved bloodflow in the lower legs. By encouraging users to move and flex their feet throughout the day the mats can reduce the constant stress which joints of the lower limbs are subjected to, spreading the load over a wider area and reducing the potential for stiff and aching joints resulting from inactivity.

Unlike some "anti-fatigue" mats which are advertised as being suitable for either standing or for sitting on in an office chair - Eco-Pro Anti-Fatigue mats are designed for standing only. The result is that Eco-Pro mats provide a much higher degree of cushioning than those other "hybrid use" mats, providing users with greater comfort throughout the day.

NewLife Eco-Pro mats are manufactured in the USA and certified by the National Floor Safety Institute for their high traction no-slip bottom surface. All edges are beveled at 18° which greatly reduces the potential for the mat becoming a tripping hazard. They are available in a variety of sizes to meet the needs of most implementations, and come in Black and Taupe.

Those who prefer to work without footwear may find the GelPro Elite Anti-Fatigue Mat a more appealing alternative as it is designed with this type of usage in mind.



NewLife Eco-Pro Anti-Fatigue Mats par Lets Gel offre l`utilisateur la balance idéal de confort et support pour les applications debout. Les tapis sont 0.75 po d`épais et compris une technologie exclusif de qualité commerciale de cellulon polyuréthane qui peut gérer l`utilisation intensive d`un environnement de bureau sans perdre sa résilience (tel que s`aplatir ou s`effondrer dans un cours temps). Les tapis sont résistantent aux taches et aux perces, ont des propriétés microbials, et compris la construction respectueuse de l`environnement en utilisant du Bio-Foam- une ressource renouvelable d`origine végétale.

Les tapis Eco-Pro sont rembourrés avec un degré élevé ou "bounce" qui peut réduire la compression sur la colonne vertébrale et réduit ou évite l`inconfort des pieds, jambes et le bas du dos. En plus, le mouvement que ces tapis encourage peuvent aussi encourager de tendre les muscles du mollet ce qui peut améliorer la circulation sanguine dans la partie inférieur des jambes. En encourageant l`utilisateur de bouger et de tendre les pieds durant la journée, les tapis peuvent réduire la tension constant que les jointures des membres inférieurs sont exiger d`avoir. En effet, cela disperse le poids sur une plus grande surface et réduit le risque potentiel des jointures qui deviennent rigides et douloureux causer par inactivité.

Contrairement à certaine tapis "anti-fatigue" qui sont annoncé à être approprié pour les applications debout et pour applications assis - les tapis d`Eco-Pro Anti-Fatigue mats sont conçu pour debout seulement. Le résultat est que les tapis Eco-Pro offrent du matériaux de rembourrage beaucoup plus élevé que les tapis à double usage, qui offre les utilisateurs un plus grand confort à travers la journée.

Les tapis NewLife Eco-Pro mats sont fabriqué dans les États-Unis et certifier par l`Institu national de sécurité de plancher (National Floor Safety Institute) pour leur surfaces de dessous de haut traction et non glissantes. Toutes les bords sont en biseau à 18° et en effet réduit considérablement la potentiel que le tapis soit un risque de trébuchement. Ils sont disponible dans une gamme de tailles pour répondre au besoins de la majorité des applications. Les couleurs sont Noir et Taupe.

Les utilisateurs qui préfère travailler sans les souliers vont peut-être trouver que le GelPro Elite Anti-Fatigue Mat est un alternative plus intéressant tel qu`il est créer avec cette application en tête.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
104-01-2032-120" x 32" x 0.75", Black
Consider the MATAR Anti-Fatigue MatMMT-2032-BLK
104-01-2032-820" x 32" x 0.75", Taupe
104-01-2436-124" x 36" x 0.75", Black
Consider the MATAR Anti-Fatigue MatMMT-2436-BLK
104-01-2436-824" x 36" x 0.75", Taupe
Consider the MATAR Anti-Fatigue Mat MMT-2436-TPE
104-01-2048-120" x 48" x 0.75", Black
Consider the MATAR Anti-Fatigue Mat MMT-2048-BLK
104-01-2048-820" x 48" x 0.75", Taupe
104-01-2072-120" x 72" x 0.75", Black
Consider the MATAR Anti-Fatigue Mat MMT-2072-BLK
104-01-2072-820" x 72" x 0.75", Taupe
Consider the MATAR Anti-Fatigue Mat MMT-2072-TPE
104-01-3660-136" x 60" x 0.75", Black
104-01-3660-836" x 60" x 0.75", Taupe





Duet Sit-Stand Storable Arm

by KV Waterloo



This arm is similar to the standard Duet arm but offers storability along a 23" (58.4 cm) storage track, has slightly less range of movement and uses a paddle instead of a T-Pull for height adjustment.

Make your own custom tray or purchase our ...



This arm is similar to the standard Duet arm but offers storability along a 23" (58.4 cm) storage track, has slightly less range of movement and uses a paddle instead of a T-Pull for height adjustment.

Make your own custom tray or purchase our special 12" (30.5 cm) deep Duet Trays (in the Trays category). The 39" (99.1 cm) tray is wide enough for a keyboard, mouse, phone and notepad - a complete desk available for use while sitting or standing.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
7090D2300B23Accommodates a 23" keyboard tray
7090D2700B23Accommodates a 27" keyboard tray
7090D3100B23Accommodates a 31" keyboard tray
7090D3900B23Accommodates a 39" keyboard tray





Surface TaskMate

by Health Postures



The Surface Taskmate from HealthPostures facilitates sit/stand stations for non-office, industrial use. It incorporates rugged construction and an easy-to-use, quiet mechanism. The height is adjusted by simply pressing a button. It is small enough to ...



The Surface Taskmate from HealthPostures facilitates sit/stand stations for non-office, industrial use. It incorporates rugged construction and an easy-to-use, quiet mechanism. The height is adjusted by simply pressing a button. It is small enough to fit on existing workstations and can be customized with accessories so the entire workstation is completely height adjustable. It is also an excellent solution for workstations that are accessed by more than one person. The TaskMate comes fully assembled.

  • Reduce neck and back strain
  • Ideal for multi-user workstataions
  • Holds up to 75 lbs
  • Non-slip pads and Velcro attachment for added stability
  • Minumum assembly required
  • Simple push-button control
  • Easy to clean and durable surface




Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
6252Surface TaskMate, sit-to-stand freestanding workstation, composed of 6254, 6150
6254Surface TaskMate, sit-to-stand freestanding workstation
Accessories
Model #DescriptionSynnex SKU
6132 TaskMate Keyboard Tray with Mouse Tray Swing-Out Mouse Tray Accessory, Swing-A-Mouse mounts on either side and swings under the platform tray when not in use, 22" W x 14" D x 0.5" H
6141-WHT Health Postures TaskMate Small Tabletop Accessory (24" W x 18"D), White
6142 Health Postures TaskMate Small Copy/Phone Holder Accessory, 10.5" x 8", Black
6142-WHT Health Postures TaskMate Small Copy/Phone Holder Accessory, 10.5" x 8", White
6150 Health Postures TaskMate Small Tabletop Accessory (24" W x 18"D), Black
6151 Health Postures TaskMate Large Tabletop Accessory (31" W x 20"D), Black
6155 Health Postures TaskMate Medium Winged Tabletop Accessory (30" W x 14"D), Black





MATAR Anti-Fatigue Mat

by ErgoVerse



* NEW PORTABLE models Now Available!

MATAR Anti-Fatigue Mats by ErgoVerse provide an ideal balance of comfort and support for standing applications. Adding a MATAR to a workstation can greatly reduce fatigue in the feet, legs ...



* NEW PORTABLE models Now Available!

MATAR Anti-Fatigue Mats by ErgoVerse provide an ideal balance of comfort and support for standing applications. Adding a MATAR to a workstation can greatly reduce fatigue in the feet, legs and lower back. The resilient pushback provided by these mats improves circulation, encourages movement, and lessens the impact on joints that is associated with shifting of weight. MATAR mats will also not bottom out, fatigue, or collapse and are resistant to staining. While not completely impervious to cuts or punctures, these mats are highly resistant to damage of this sort. Punctures or small cuts are possible but they will not impede the performance of MATAR mats, only their resistance to liquids. In addition, the gel-free composition precludes the possibility of gel oozing out. The sealed surface lets them be cleaned easily and the material itself has anti-microbial properties.

These 0.75" thick mats are formed from 100% polyurethane and feature eco-friendly construction that employs a renewable plant-based resource and are manufactured using proprietary commercial grade PUR Technology. The result are mats that are able to handle the heavy usage of the most demanding work environments without wearing out or losing resiliency.

Unlike more common hybrid use sit-stand mats, which are necessarily firmer to accommodate a rolling chair, MATAR mats provide a much higher degree of cushioning for the feet. They are therefore much more successful at being anti-fatigue mats, which is what makes them ideal for use at standing desks, raised work counters, and warehouse data entry stations.

MATAR Mats are available in 4 sizes to meet a variety of workplace needs, with smaller ones where standing is required at a single point, up to the 72" long mats for longer counters or production stations. The 20"x32" and 24"x36" sizes are available in a model with a high visibility yellow stripe to draw attention to the presence of the mat in environments where this is a desirable feature. The Portable Models include a convenient cutout handle to make it easier to move the MATAR out of the way when a chair will be used or to transport the mat between locations.

Note: The handle cutout on the Portable models can permit moisture into the foam core so these should only be used in areas where exposure to liquids will be minimal.



* NOUVEAUX modèles "PORTABLE" sont maintenant disponible!

Le MATAR Anti-Fatigue Mat par ErgoVerse offre un équilibre idéal entre le confort et le soutien pour les applications debout. L'ajout d'un MATAR à un poste de travail peut réduire considérablement la fatigue des pieds, des jambes et du bas du dos. Le résistance flexible fourni par ces tapis améliore la circulation, encourage le mouvement et réduit l'impact sur les articulations qui est associé au transfert de poids. Les tapis MATAR ne s'affaissent pas, ne se fatiguent pas, ne s'effondrent pas et sont résistant aux taches. Bien qu'ils ne soient pas complètement imperméables aux coupures ou aux perforations, ces tapis sont très résistants à ce genre de dommages. Des perforations ou de petites coupures sont possibles mais elles n'arrêteront pas les performances des tapis MATAR, seulement leur résistance aux liquides. De plus, la composition sans-gel empêche la possibilité d'un écoulement de gel. La surface fermée permet de les nettoyer facilement et le matériau lui-même possède des propriétés antimicrobiennes.

Ces tapis de 0.75po d'épaisseur sont fabriqués de 100% polyuréthane avec manière écologique à partir d'une ressource végétale renouvelable et à l'aide d'une Technologie PUR exclusive de qualité commerciale. Le résultat est un tapis capable de supporter l'usage intensif des environnements de travail les plus exigeants sans fatigué ou perdre de sa résilience.

Contrairement aux tapis assis-debout à usage hybride plus communs, qui nécessite à être plus solide pour s'adapter à une chaise roulante, les tapis MATAR offrent un degré de rembourrage beaucoup plus élevé pour les pieds. Ils sont donc beaucoup plus efficaces en tant que tapis "anti-fatigue", ce qui les rend idéaux pour les bureaux debout, les comptoirs de travail surélevés et les postes de saisie de données dans les entrepôts.

Les MATAR Mats sont disponibles en 4 tailles pour répondre à une variété de besoins de travail, des plus petits où il faut se tenir debout à un seul endroit, jusqu'aux tapis de 72po de long pour les comptoirs plus longs ou les postes de production. Les tapis avec dimensions de 20po x 32po et 24po x 36po sont disponibles dans un modèle avec une bande jaune haute visibilité pour attirer l'attention sur la présence du tapis dans les environnements où cela est souhaitable. Les Modèles Portables comprennent une poignée découpée pratique pour faciliter le déplacement du MATAR lorsqu'une chaise est utilisée ou pour transporter le tapis d'un endroit à l'autre.

Veuillez noter: La découpe de la poignée sur les modèles Portable peut permettre à l'humidité de s'infiltrer dans l'interieur de la mousse et ne doit donc être utilisée que dans les endroits où l'exposition aux liquides est minimale .



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
MMT-2032-BLK20" x 32" x 0.75", Black5881251
MMT-2032-TPE20" x 32" x 0.75", Taupe5881252
MMT-2032-TPE-CLASSIC20" x 32" x 0.75", Taupe (no logo)
MMT-2032-GRY-HNDL20" x 32" x 0.75", Grey, with HANDLE
MMT-2032-BLK-HNDL20" x 32" x 0.75", Black, with HANDLE
MMT-2032-BYW20" x 32" x 0.75", Black with Yellow Stripe5881253
MMT-2436-BLK24" x 36" x 0.75", Black5881258
MMT-2436-TPE24" x 36" x 0.75", Taupe5881258
MMT-2436-BYW24" x 36" x 0.75", Black with Yellow Stripe5881260
MMT-2048-BLK20" x 48" x 0.75", Black5881254
MMT-2048-TPE20" x 48" x 0.75", Taupe5881255
MMT-2072-BLK20" x 72" x 0.75", Black5881256
MMT-2072-TPE20" x 72" x 0.75", Taupe5881257





Fixed Leg Set

by ConSet



The Fixed Leg Set from Conset offers a solution for Sit-Stand workstation layouts where additional "non-elevating" work space is desired. The leg sets (available in Black or Silver) can be easily attached to any top capable of accepting screws and ca ...



The Fixed Leg Set from Conset offers a solution for Sit-Stand workstation layouts where additional "non-elevating" work space is desired. The leg sets (available in Black or Silver) can be easily attached to any top capable of accepting screws and can be used to provide a "sitting height" space for conferring with clients or co-workers without the necessity of lowering the entire worksurface. It also offers a more cost-effective solution where only a portion of a workstation (especially corner workstations) needs to be height adjustable. In these cases, a single or two-leg height adjustable frame can be used to elevate the worksurface while the secondary worksurface(s) can be supported by fixed legs. These legs can also be employed to replace support and restore stability which can be lost when detaching a portion of a complete desk for conversion to a height adjustable desk.

The 27.25" metal legs are equipped with cast metal mounting plates for secure attachment to any desk surface that can accept standard screws and feature a height adjustable foot that provides an additional 0.75" of adjustment range. When calculating the finished height of a mounted worksurface remember to add the thickness of the work surface or table top that is to be added.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
61-690-BK-1Conset Fixed Leg Set (4) with Mounting Plates, Black
61-690-SV-1Conset Fixed Leg Set (4) with Mounting Plates, Silver





1 2 >


Copyright © Micwil Group of Companies Ltd, Micwil is a Registered Trademark of Micwil Group of Companies Ltd.
Legal Notices Privacy