Accessories

Arm Supports/Rests

Book Holders

Document Holders

Fitness/Wellness

Foot Rests

Heating Solutions

Laptop Solutions

Miscellaneous

Monitor Accessories

Monitor Arms - Accessories

Mouse Accessories

Office Essentials

Palm Supports/Rests

Phone Accessories

Reference Organizers

Seating Accessories

Switches/Interfaces

Task Lighting

Tablet Solutions

Writing Solutions

CLEARANCE ACCESSORIES

Search By:

Tablet Solutions

< 1 2 3 4 >


Pillow Tablet Stand

by Evoluent



The Pillow Tablet Stand from Evoluent is a comfortable and easily adjustable support designed to relieve hand and arm fatigue when using a tablet, eReader, or phone while lounging. In addition to reducing fatigue it also positions the screen at an an ...



The Pillow Tablet Stand from Evoluent is a comfortable and easily adjustable support designed to relieve hand and arm fatigue when using a tablet, eReader, or phone while lounging. In addition to reducing fatigue it also positions the screen at an angle better suited for viewing, reducing the potential for neck strain and tension headaches and provides a cushioned arm and wrist support. The soft padded surface elevates the device and can easily be repositioned and tucked where most comfortable. When a tablet is not in use it can be flipped over to look like any other decorative pillow.

The Evoluent Pillow Tablet Stand will support devices up to 0.45" thick, including cases. A simple magnetic insert converts it for use with "bare" devices. Rubber grips keep devices neatly secured along the lower edge without encroaching on the viewing area.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
CV1Evoluent Pillow Tablet Stand, Gold





TabStand Multi-function Stand for iPad 2

by Aidata



The TabStand Multi-function Stand for iPad 2 from Aidata is a lightweight and portable stand for holding and displaying an iPad either in hand, on a desk or table, or by hanging. Made of durable hard plastic on the outside and soft rubber on the insi ...



The TabStand Multi-function Stand for iPad 2 from Aidata is a lightweight and portable stand for holding and displaying an iPad either in hand, on a desk or table, or by hanging. Made of durable hard plastic on the outside and soft rubber on the inside, it is easy to assemble and configure in landscape or portrait orientation.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
ISP202WBPortable station for iPad for holding, standing, or hanging in landscape or portrait orientation, detachable shell, white with black trim.





Universal Tablet Cradle

by Ergotron



The Universal Tablet Cradle from Ergotron supports a tablet directly alongside an arm-mounted monitor. Utilizing the VESA mount, the cradle attaches using a sliding bracket that positions the Tablet Cradle to one side of the monitor. The convenient a ...



The Universal Tablet Cradle from Ergotron supports a tablet directly alongside an arm-mounted monitor. Utilizing the VESA mount, the cradle attaches using a sliding bracket that positions the Tablet Cradle to one side of the monitor. The convenient adjustable bracket quickly adapts to the tablet size and control positions and works with a wide range of tablets and e-Readers. To ensure secure placement the cradle latches into place while still permitting easy removal and replacement of the tablet when mobility is required. The Universal Tablet Cradle will work with monitors up to 24.5" in physical width. It is also possible to remove the sliding bracket and mount the Tablet Cradle portion directly to a VESA 75 or 100 monitor arm.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
80-106-085Ergotron Universal Tablet Cradle Accessory





Universal Tablet Suction Stand

by Aidata



The Universal Tablet Suction Stand from Aidata securely holds a wide range of tablets and eReaders (7" to 10" - see specifications) onto smooth surfaces such as cabinets, countertops, desks, and glass using a silica suction cup. It can also be easily ...



The Universal Tablet Suction Stand from Aidata securely holds a wide range of tablets and eReaders (7" to 10" - see specifications) onto smooth surfaces such as cabinets, countertops, desks, and glass using a silica suction cup. It can also be easily moved between locations by simply releasing the suction. The tablet holder gives 360° of rotation, 360° of swivel, and about 120° of tilt, so that the viewing angle of the tablet can be configured into almost any comfortable and ergonomic orientation, regardless of the installation location. The convenient swivel base makes this ideal for use when working in the kitchen - as it pivots easily for optimal viewing from any direction.

Weighing approximately 4 lbs, this compact stand (11" x 13" x 5") is made of both plastic and metal and is available in black colour only.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
US-2120SAidata Universal Tablet Suction Stand, for tablets 7" to 10"





Car Headrest Tablet Mount

by Aidata



The Car Headrest Tablet Mount from Aidata is ideal for mounting a tablet to a car headrest for back seat viewing. The universal clamp fits most car headrests that have pole spacing from 55 to 185 mm. The spring-loaded tablet bracket can securely hold ...



The Car Headrest Tablet Mount from Aidata is ideal for mounting a tablet to a car headrest for back seat viewing. The universal clamp fits most car headrests that have pole spacing from 55 to 185 mm. The spring-loaded tablet bracket can securely hold most tablets from 7.9" to 13" (see specifications) and can be easily rotated 360° to switch between landscape and portrait orientations, making watching a movie or playing a game equally practical. The tablet bracket is tilt adjustable to optimize viewing and reduce glare when necessary and also features a quick release that lets the bracket and tablet be detached as a unit for portability, ideal if going to appointments, shopping, etc. The headrest clamp can remain in place or be easily transferred to another vehicle if needed.

Note: The Car Headrest Tablet Mount is not compatible with one-piece high-back seats that have incorporated headrests.



Le Car Headrest Tablet Mount d'Aidata est idéal pour fixer une tablette sur l'appuie-tête d'une voiture afin de pouvoir la regarder du siège arrière. La pince universelle s'adapte à la plupart des appuis-tête de voiture dont l'espacement des poteaux est compris entre 55 et 185 mm. Le support en crochet est avec ressort qui permet de tenir en toute sécurité la plupart des tablettes de 7.9 à 13po (voir les spécifications) et peut être facilement tourné à 360° pour passer de l'orientation vertical ou horizontal, ce qui permet de regarder un film ou de jouer à un jeu. Le support de la tablette est ajustable en inclinaison afin d'optimiser la visualisation et de réduire l'éblouissement si nécessaire. Il est également doté d'un dégagement rapide qui permet de détacher rapidement la tablette et le support en crochet du support fixe en tant qu'unité complète pour la portabilité, idéal pour un rendez-vous, durant la magasinage, etc. La pince d'appui-tête peut rester en place ou être facilement transférée dans un autre véhicule si nécessaire.

Veuillez noter: Le Car Headrest Tablet Mount n'est pas compatible avec les sièges à haut dossier d'une seule pièce qui ont des appuis-tête incorporés.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
US-5122CCar Headrest Tablet Mount - Headrest mount for cars, tablet sizes 7.9" to 13", Black5800346





Universal Tablet Station Combo

by Aidata



The Universal Tablet Station Combo from Aidata is ideal for viewing a tablet whether at work or at home. This combination stand includes two different styles of base. The first is a weighted base that is ideal for desk, table or countertop use. It ra ...



The Universal Tablet Station Combo from Aidata is ideal for viewing a tablet whether at work or at home. This combination stand includes two different styles of base. The first is a weighted base that is ideal for desk, table or countertop use. It raises the tablet to improve viewing comfort by reducing the need to bend down to view the screen. The second option is a light-weight ring stand that is well-suited for use in more temporary applications where portability is important. The ring stand also makes it much easier to safely hold the tablet with a single hand, eliminating the need to "pinch grip". Switching between bases takes just seconds as the clamp simply snaps on and off of both bases. Both mounting options offer a full 180° of tilt for optimizing viewing and the tablet bracket also offers a full 360° of rotation for both landscape and portrait viewing. The Universal Tablet Station Combo will accommodate most tablets with 7.9" to 13" diagonal dimensions. (see specifications).



Le Universal Tablet Station Combo d'Aidata est idéal pour regarder une tablette, que ce soit au travail ou à la maison. Ce support combiné comprend deux styles de base différents. Le premier est une base alourdi idéale pour une utilisation sur un bureau, une table ou un comptoir. Il soulève la tablette pour améliorer le confort de visualisation en réduisant la nécessité de se pencher pour regarder l'écran. La deuxième option est un support anneau léger qui convient parfaitement aux applications plus temporaires où la portabilité est importante. Le support anneau permet également de tenir la tablette d'une seule main en toute sécurité, éliminant ainsi le besoin de "pincer" pour tenir. La transition entre une base à l'autre ne prend que quelques secondes, car la pince s'enclenche et se retire simplement des deux bases. Les deux options de montage offrent une inclinaison de 180° pour optimiser l'affichage et le support de la tablette offre également une rotation de 360° pour l'affichage en mode paysage ou portrait. Le Universal Tablet Station Combo s'adapte à la plupart des tablettes d'une diagonale comprise entre 7.9 et 13 pouces. (voir spécifications).



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
US-5026Universal Tablet Station Combo - Fits most tablets 7.9" to 13", Black5800344





Astuto Ultimate Ultraportable Device Stand

by iMoov



The Astuto Ultimate Ultraportable Device Stand from iMoov provides laptop, notebook and tablet users with a highly portable universal stand that can be used to improve ergonomics virtually anywhere that any of these devices may be used.

The un ...



The Astuto Ultimate Ultraportable Device Stand from iMoov provides laptop, notebook and tablet users with a highly portable universal stand that can be used to improve ergonomics virtually anywhere that any of these devices may be used.

The unique design of the Astuto Device Stand provides improved ergonomics by elevating the device screen by up to almost 7" (on a desk or table) or slightly less when used on the lap or similar soft surface. This elevation reduces the risks associated with bending the neck for viewing screens that are placed below eye level. The convenient tablet/phone slots offer two preset angles, one for when actively working on the tablet or phone screen, or a second higher angle slot for use when primarily viewing content such as movies. The second slot has two thumbwheel adjusters that can be used to move the device to a steeper angle when desired. Elevating a notebook or laptop when being used in the lap enables the wrists to maintain a neutral alignment and reduce wrist extension.

The Astuto Device Stand is designed for portability. When folded it takes up just 7.72" x 1.12" x 10.43" and weighs only 1.74 lbs, meaning it can be easily transported anywhere a device might be used. It can be opened or stored in less than 10 seconds and when unfolded doubles in width to 14.6". Sliding locking tabs create a rigid surface and the legs unfold and lock into position to ensure stable placement whether on the lap or desk. The flexible lap straps contour to the legs with the velvet underside ensuring grip and comfort even when used directly on the skin.

The iMoov Teclado Bluetooth 3.0 Keyboard is a perfect accessory to the Astuto. This ultra-slim (0.26") rechargeable keyboard can be paired with up to three devices, ideal for users who work with multiple devices. It magnetically locks into slots on the Astuto Stand for use with a tablet or phone or can just as easily be used on a desk surface when using the Astuto Stand to elevate the screen of a laptop or notebook.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
AST01Astuto Ultimate Ultraportable Device Stand
Accessories
Model #DescriptionTD Synnex SKU
TKB01-US Teclado Bluetooth Keyboard, White, (Bluetooth)
BI01-10BLA iMoov Bag It Small, Black
BI01-14BDG iMoov Bag It Large, Dark Grey





Universal Tablet Wall Mount

by Aidata



The Universal Tablet Wall Mount from Aidata is ideal for mounting a tablet to a wall, cabinet, desk, or any other flat surface (must be able to attach via 3 screws). The spring-loaded bracket (which holds most 7.9" to 13" tablets, measured diagonally ...



The Universal Tablet Wall Mount from Aidata is ideal for mounting a tablet to a wall, cabinet, desk, or any other flat surface (must be able to attach via 3 screws). The spring-loaded bracket (which holds most 7.9" to 13" tablets, measured diagonally) can be rotated 360° and is tilt and pan adjustable to meet varying viewing requirements. The bracket features a quick release which lets the tablet and bracket be quickly detached from the mount as a complete unit for portability without needing to remove the tablet from the bracket.



Le Universal Tablet Wall Mount d'Aidata est idéal pour fixer une tablette sur un mur, une armoire, un bureau ou toute autre surface plate (doit pouvoir être fixé par 3 vis). Le support en crochet est avec ressort, et peut tenir la plupart des tablettes de 7.9po à 13po, mesurées en diagonale. Il peut être tourné à 360° et est réglable en inclinaison et en orientation pour répondre aux différents besoins de visualisation. Le support en crochet est doté d'un dégagement rapide qui permet de détacher rapidement la tablette et le support en crochet du support fixe en tant qu'unité complète pour la portabilité sans avoir à retirer la tablette du support en crochet.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
US-5111LAidata Tablet Wall Mount - Wall mount for tablets 7.9" to 13"5800345





LEVO Dual Clamp Tablet Cradle for LEVO G2 Tablet Stands

by Levo



The LEVO Dual Clamp Tablet Cradle for LEVO G2 Tablet Stands can be purchased to upgrade the original LEVO G2 Tablet Platform that used bungee cords to secure devices. It can also be used as an accessory to expand the capabilities of the LEVO Laptop W ...



The LEVO Dual Clamp Tablet Cradle for LEVO G2 Tablet Stands can be purchased to upgrade the original LEVO G2 Tablet Platform that used bungee cords to secure devices. It can also be used as an accessory to expand the capabilities of the LEVO Laptop Worktation and Book Holder models. The Dual Clamp Cradle is able to hold any tablet—including case—up to 13.5" x 9.25" and will also accommodate the Apple Pencil connection and front camera access for Face ID. Individual clamping tabs are also removable to potentially accommodate tablets whose dimensions may be wider or longer than the standard capacity. In many cases, the clamp will also hold smaller devices such as smartphones, as long as they are 5.5" or more in height or width.

Devices are mounted using a quick-release ratchet mechanism that locks in place. The ratchet is disengaged with a slide of a lever on the rear of the clamp, permitting the clamp to open effortlessly for easy device removal. This simple design means that devices of any suitable dimensions can be attached or detached in seconds. The cradle is also equipped with a tilt tension adjustment to maintain ideal viewing angles regardless of device weight (up to 4 lbs maximum).

Note: The Dual Clamp Tablet Cradle is not compatible with the LEVO G1 or earlier LEVO models.



Le LEVO Dual Clamp Tablet Cradle for LEVO G2 Tablet Stands peut être acheté pour améliorer le LEVO G2 Tablet Platform origine qui utilisait des élastiques pour attaché les appareils. Il peut également être utilisé comme accessoire pour améliorer les capacités des modèles LEVO Laptop Worktation et Book Holder. Le Dual Clamp Cradle peut accueillir n'importe quelle tablette, y compris un boîtier de la tablette, jusqu'à 13.5 x 9.25po, ainsi que la connexion Apple Pencil et l'accès à la caméra frontale pour l'identification faciale. Les languettes de serrage individuelles sont également amovibles pour potentiellement accueillir des tablettes dont les dimensions peuvent être plus larges ou plus longues que la capacité standard. Dans de nombreux cas, la pince peut également accueillir des appareils plus petits tels que des smartphones, à condition qu'ils aient une hauteur ou une largeur de 5.5po ou plus.

Les appareils sont montés à l'aide d'un mécanisme à cliquet (ratchet) à dégagement rapide qui se sécure en place. Le cliquet (ratchet) se désengage en faisant glisser un levier situé à l'arrière de la clamp, ce qui permet à celle-ci de s'ouvrir sans effort pour faciliter d'enlever l'appareil. Cette conception simple permet de fixer ou de détacher des appareils de toutes dimensions en quelques secondes. Le cradle est également équipé d'un ajustement de la tension d'inclinaison pour maintenir des angles de vision idéaux quel que soit le poids de l'appareil (jusqu'à 4 livres maximum).

Veuillez noter: Le Dual Clamp Tablet Cradle n'est pas compatible avec le LEVO G1 ni avec les versions anciennes de LEVO.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
33707LEVO Dual Clamp Cradle Accessory Kit for LEVO G2 (slide lock mechanism)
Accessories
Model #DescriptionTD Synnex SKU
35411 LEVO Pro Clamping Ends for Dual Clamp Tablet Holder (Compatible ONLY with LEVO Dual Clamp Cradle Accessory Kit for LEVO G2: model 33707)
35412 LEVO Security Clamping Tabs for Dual Clamp Tablet Holder (Compatible ONLY with LEVO G2 Deluxe Tablet Stand - model 33768 and LEVO Dual Clamp Cradle Accessory Kit for LEVO G2 - model 33707)





R-Go Riser Duo Tablet and Laptop Stand

by R-Go Tools



The R-Go Riser Duo Tablet and Laptop Stand from R-Go Tools is a highly portable and re-configurable stand that can be used to elevate both laptop and tablet screens for improved viewing ergonomics. For tablet screens in particular it offers an except ...



The R-Go Riser Duo Tablet and Laptop Stand from R-Go Tools is a highly portable and re-configurable stand that can be used to elevate both laptop and tablet screens for improved viewing ergonomics. For tablet screens in particular it offers an exceptional screen height. In both laptop and tablet modes the stand also serves as an inline document holder, supporting documents directly below the screen.

The R-Go Riser Duo is constructed of lightweight aluminum composite for ease of transport and the entire unit compacts down to just 5 mm in thickness. Folding and unfolding the stand can be completed in just seconds, making it ideal for on-the-go use. In both laptop and tablet modes there are 4 positions available to accommodate personal preferences in screen elevation, raising an average laptop screen 6" or more above the surface and tablets over 9". Elevating the screens greatly reduces the downward bend in the neck and/or torso required when a laptop or tablet is placed directly on a desk or table.

Note: This stand is designed to be used with an external keyboard and mouse.



Le R-Go Riser Duo Tablet and Laptop Stand de R-Go Tools est un support extêmement portable et reconfigurable qui peut être utilisé pour élever les écrans d'ordinateurs portables et de tablettes afin d'améliorer l'ergonomie de moniteur. Pour les écrans de tablettes en particulier, il offre une hauteur d'écran exceptionnelle. En mode ordinateur portable ou tablette, le support sert également de porte-documents en ligne, soutenant les documents directement sous l'écran.


Veuillez noter:: Ce support est conçu pour être utilisé avec un clavier et une souris externes.



Click Here for Models and Accessories Information

Models
Model #DescriptionTD Synnex SKU
RGORIDUOBLR-Go Riser Duo Tablet and Laptop Stand





< 1 2 3 4 >


Copyright © Micwil Group of Companies Ltd, Micwil is a Registered Trademark of Micwil Group of Companies Ltd.
Legal Notices Privacy