The Kinesis Advantage Dual Foot Switch Accessory is the most efficient way to utlilize the unique foot input options provided with all Kinesis Contoured keyboards. The default actions are "Keypad Shift" and "Shift". The "Keypad Shift" action turns on the embedded keypad layer as long as the pedal is held down. If the Keypad Toggle function key is tapped first, then the "Keypad Shift" pedal will turn OFF the embedded keypad layer while the pedal is held down. With a programmable Contoured keyboard, the foot switch may be configured to perform any user-defined keystroke or macro!

The Kinesis Triple Pedal Accessory is the most efficient way to take advantage of the unique foot input options provided with all Kinesis Contoured keyboards. Default actions are "Keypad Shift," "Keypad Enter," and "Shift." The "Keypad Shift" action turns on the embedded keypad layer as long as the pedal is held down. If the Keypad Toggle function key is tapped first, then the "Keypad Shift" pedal will turn OFF the embedded keypad layer while the pedal is held down. With a programmable Contoured keyboard, the foot switch may be configured to perform any user-defined keystroke or macro.

The StealthSwitch II FS-2 Slave footswitch is one of 4 optional foot switches. Up to 4 slave switches are supported by the StealthSwitch II and are fully programmable in both Windows and Mac. The FS-2 has a louder click sound than the FS-1, yet provides tactile feedback to the user. Made of ABS plastic, this footswitch has a 6' (1.8 m) long cable that terminates in a 0.125" (3.5 mm) mono plug and requires about 0.125" (3.5 mm) to activate.

The Footcursor is a foot-operated mouse designed for use by individuals with limited upper extremity mobility, upper extremity disabilities, repetitive stress injuries, or cumulative stress disabilities. Usable with either foot, this device enables the user to perform cursor movement with a foot. The Footcursor consists of a square plate base with a moveable round plate which sits on top of the square surface. An embedded microchip detects movement of the user's foot on the the round plate and translates it to the cursor's movement on the computer monitor. For example, when the round plate is moved to the right, the cursor moves to the right, and when the round plate is moved toward the user's back, the cursor moves down. The Footcursor has an input jack which allows a single switch to be attached for performing a left or double click action. The Advanced model also incorporates the ability to perform mouse clicks - to perform a right click users lift the front part of the foot and leave the heel on the Footcursor Advanced Version. For left clicks, users lift the back part of their foot and leave the front part on the Footcursor Advanced Version. Users also can do double-clicks and drag-and-drops (learning and practice is required).

The Footcursor can be used in conjuction with other pointing devices as well as USB footswitches.

We cannot offer a warranty or our 30 day CSG on this product, and the manufacturer is no longer in business. We are testing each item before it ships to ensure it is fully functional.

Check out our range of switches in the Switches category.

The StealthSwitch3 Programmable USB Switch Controller from H-Mod provides users with a means of transferring or reducing the heavy workload which the hand and fingers encounter in daily computer use. Mouse clicks, keyboard shortcuts, and multi-key macros can be programmed and triggered by foot pedals or many other types of switches.

Other common applicatons of the StealthSwitch3 Programmable USB Switch Controller include a wide variety of gaming functions, photo booth triggers, transciption control, etc.

With the StealthSwitch3 Programmable USB Switch Controller multiple switches can be connected to a CPU through a single USB port. The StealthSwitch3 Programmable USB Switch Controller is truly universal, fully programmable, and easy-to-use with both the Windows (including Windows 8.1) and Mac OS-X platforms.

The StealthSwitch3 supports up to 5 external switches (available separately) , and the number of accessible commands can be can be raised to 8 by using Shift mode which uses one switch to enable the other switches to access an alternate set of commands. Switches can be programmed to send keystrokes, mouse clicks, double clicks, drag lock, hotkeys, or macros (maximum of 4 keystrokes per macro). The StealthSwitch3 is fully programmable using the downloadable drivers. Once it is programmed, all settings are stored in the switch interface hardware so no software or drivers are required, even if you move the unit to another computer. This is especially convenient where deployment is intended on limited access systems, as programming can do done by loading the software on another computer which is not subject to these restrictions. Multiple configuration files can be created and stored for later access. MAC users receive a bonus benefit from the RoboCon program which automatically re-configures the switch interface based on the current application, allowing the setting of application-specific command layouts. This controller may be used with any of the StealthSwitch II Slave Footswitches, or for other options check out our range of switches in the Switches category.

A Savant USB Foot Switch is factory programmed to perform mouse clicks. The compact design features a wide center pedal and two smaller outer pedals. The large center pedal has minimal travel for your most heavily used key action and is factory programmed to perform the regular "left button" mouse click. The outer "piano-key" pedals offer two additional actions (right click and scrolling) without having to search for a second and third footswitch on the floor. Adjustment screws allow fine-tuning of pedal travel.

NOTE: Custom programming these pedals requires access to a PC running 32 bit versions of Windows XP, VISTA, or 7.

The StealthSwitch Tripod Slave Footswitch is an accessory footswitch for use with the StealthSwitch3 Programmable USB Switch Controller or any other Controller or Switch-activated device. The unique design of this switch means that it can be activated from any direction, unlike traditional "pedal" stype foot switches that activate from a specific direction. Activation notification is provided by a distinct but reasonably quiet click in combination with the tactile response of the switch. Made of ABS plastic, this footswitch has a 6' (1.8 m) long cable that terminates in a 1/8" (3.5 mm) mono plug and requires about 0.0625" (1.6 mm) to activate.
NOTE: The StealthSwitch FS-1 Slave footswitch provides no functionality on its own. Command functionality can only be accomplished by connecting this to a programmable Switch Controller, pre-programmed device, or Switch-activated device.

This product is a complete hands-free mousing replacement offering cursor control, regular clicks and additional programmable actions. 'Program Specific' commands can be set by utilizing the downloadable Footmouse Assistant Software.

The unit works plug and play out of the box with a vertical scroll wheel (orange wheel, lower left), left click (red button, lower centre), double left click (red button, lower right), right click (red button, upper right) and 2 programmable buttons (yellow, upper centre and left) which can all be assigned specific commands using the Footmouse Assistant Software. The user can also make all 5 buttons programmable by toggling a yellow 'enable programming button' on the side of the unit. The buttons are 1.5" in diameter and have a crisp tactile mechanical switch rated at 500 grams.

Cursor movement is achieved by sliding your foot into the 'slipper' which has an 800 DPI optical sensor on the underside, and moving the slipper around on an oversized 'footmouse' pad which is 15.5" wide and 11" deep. The 'slipper' is 4.25" wide by 7" long and has an adjustable velcro strap to ensure any size foot is accommodated.

This product allows you to shift the effort of mousing on your computer from your hands to your feet as a complement to traditional mousing solutions.

NOTE: It is not recommended to use this device as a primary mousing device but only for occasional mousing.

NOTE: On some computers, there is an issue where the Footime unit may at times go to 'sleep' and then not wake up until you unplug and re-plug the device. Often plugging in the unit through a hub will alleviate this issue, but not always. The manufacturer is aware of the issue and is working on a fix of this for the next generation of the product, but there will be no 'fix' for the current generation. Unfortunately we are not able to identify the exact source of this problem and as such cannot advise whether you may experience this issue, however as it always is resolved by unplugging the device and plugging it in again, it isn't a serious issue (although it is inconvenient).

The Advantage360 SmartSet Foot Pedal is a dedicated accessory for Advantage 360 Contoured Keyboard models equipped with the SmartSet App (see note below). It plugs directly into the left module and once the linked function is assigned it operates as a extension of the keyboard. Using the SmartSet programming functions typists can assign a single action to be activated with a simple pedal press.

Common applications of this can include any of the following.

• Access any of the secondary layers in lieu of using the Keypad or Fn key
• Press-and-hold modifiers (e.g., Shift, Ctrl, Alt)
• Heavily used keys like Space, Tab, & Enter
• Harder to reach keys like Escape or F-Keys
• Single or Double mouse-click
• Macros