Manufacturers

Search By:
Manufacturers - Workrite Ergonomics - Product Information

Workrite Ergonomics

1


Heavy Duty Melamine Corner Keyboard Platform

by Workrite Ergonomics



The Heavy Duty Melamine Corner Keyboard Platform from WorkRite Ergonomics is a rigid platform designed for installation in the inside corner of most L-shaped desks. The rear corners are cut at a diagonal to permit the mounted tray to be elevated leve ...



The Heavy Duty Melamine Corner Keyboard Platform from WorkRite Ergonomics is a rigid platform designed for installation in the inside corner of most L-shaped desks. The rear corners are cut at a diagonal to permit the mounted tray to be elevated level with or above the desk surface. The large 27.75" W x 11.75" D platform is constructed of 5/8" thick melamine and edged with durable PVC trim. The additional thickness of this platform offers a rigidity that other thinner surfaces cannot provide and the greater mass aids in reducing vibration that can occur with lighter trays.

The Corner Keyboard Platform is equipped with soft leatherette over foam mouse and keyboard palm supports. The interchangeable mouse and keyboard sections can be easily removed if not desired, or interchanged for left or right-handed mousing. The convenient mouse cord clip can also be moved to the desired side.With the palm rests installed there is still about 8.75" of depth available for the keyboard. When the palm rest is removed that depth increases to the full 11.75".
NOTE: This platform can be mounted on the Ovation Low Profile Leverless Arm or the Ovation Sit-Stand Keyboard Arm.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
CG488-25WorkRite Heavy Duty Melamine Corner Keyboard Platform, 27.75" Wide x 11.75" Deep, Grey





Heavy Duty Melamine Keyboard Platform

by Workrite Ergonomics



The Heavy Duty Melamine Keyboard Platforms from WorkRite Ergonomics offer high rigidity and durability combined with comfort. The above average thickness of these platforms creates a rigidity that thinner materials cannot provide and the greater mass ...



The Heavy Duty Melamine Keyboard Platforms from WorkRite Ergonomics offer high rigidity and durability combined with comfort. The above average thickness of these platforms creates a rigidity that thinner materials cannot provide and the greater mass aids in reducing vibration that can occur with lighter trays. To ensure long life the 5/8" thick melamine platforms are edged with durable PVC trim. The Melamine Keyboard Platforms are also equipped with removable soft leatherette covered foam palm supports for comfort.

This platform is available in three models. The CB180-25 is 19" in width x 11.75" in depth, sufficient in size to accommodate a full-size keyboard or a compact keyboard and a touchpad or trackball (there is not really sufficient space for a standard mouse) or the palm support can be removed and a central pointing device could be deployed with a full-size keyboard. The CB182-25 comes in Black, is 25" in width by 11.75" in depth and is equipped with a mouse guard that can be moved to either side. The CG185-21 is wider at 27" but shallower, just 11" in depth. It does not come with a mouse guard. Both are equipped with the removable full width palm support.
NOTE: These platforms can be mounted on the Ovation Low Profile Leverless Arm or the Ovation Sit-Stand Keyboard Arm



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
CB182-25WorkRite Heavy Duty Melamine Keyboard Platform, 25" Wide x 11.75" Deep, Black
CG185-21WorkRite Heavy Duty Melamine Keyboard Platform, 27" Wide x 11" Deep, Grey
CB180-25WorkRite Heavy Duty Melamine Keyboard Platform, 19" Wide x 11.75" Deep, Black





Banana Board Keyboard Tray

by Workrite Ergonomics



The Banana Board Keyboard Tray from WorkRite Ergonomics is an ideal solution when there is a need to reduce the reach for the mouse. The innovative sliding curved mousing surface from which the Banana Board gets its name "pivots" or "slides" through ...



The Banana Board Keyboard Tray from WorkRite Ergonomics is an ideal solution when there is a need to reduce the reach for the mouse. The innovative sliding curved mousing surface from which the Banana Board gets its name "pivots" or "slides" through a track on the underside of the keyboard tray. Due to the pivoting action and curved design the end result is that the mousing surface is positioned about 3" closer than the keyboard tray itself. This means that smaller individuals are able to keep their mouse much closer than it would normally be on a traditional rectangular tray and eliminate the potential for overreaching. The fact that the mousing surface is effortlessly repositioned to either the left or right means it works equally well for both right and left-handed use and can encourage load-balancing by making it easier to switch between right and left-handed mousing throughout the day.

The Banana Board features extremely sturdy construction. The metal mounting plate also serves as the storage track for the sliding 0.25" thick rigid composite mousing surface. The keyboard tray itself is 19" wide by 13" deep and comes with a detachable 3" deep leatherette-covered foam palm support. Because the tray only needs to accommodate a keyboard it is also possible to deploy a separated keyboard with up to 3" of separation. The tray surface also features two grip pads to keep keyboards firmly in place. The sliding "banana board" mousing surface sits 0.5" below the keyboard tray and has a low-friction surface on both ends to ensure optimum mouse control. A retaining strip runs along the rear of the mousing surface and cables can be routed through the dual guides in the rear of the keyboard tray. The curved design of the mousing surface also makes the Banana Board a good solution for inside curved and angled corners by moving the mouse away from the desk where interference with free movement may occur.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
UB2180S25WorkRite Banana Board Keyboard Tray with Sliding Ambidextrous Mousing Surface, 19.0" Wide x 13.0" Deep, Midnight Black
UB2180S170-25WorkRite Banana Board Keyboard Tray with Sliding Ambidextrous Mousing Surface, 19.0" Wide x 13.0" Deep, Midnight Black





WorkRite UB185-25 Keyboard Platform

by Workrite Ergonomics



The WorkRite UB185-25 Keyboard Platform from WorkRite Ergonomics offers users several features. The keyboard platform is formed from 0.25" thick composite, resulting in a sturdy rigid surface with minimal flex. This large 26.75" wide x 11.5" deep pla ...



The WorkRite UB185-25 Keyboard Platform from WorkRite Ergonomics offers users several features. The keyboard platform is formed from 0.25" thick composite, resulting in a sturdy rigid surface with minimal flex. This large 26.75" wide x 11.5" deep platform is equipped with a raised rear keyboard guard with built-in cable routing, a rear mouse guard/cable retainer, a detachable foam padded leatheretter palmrest, and a low-friction 8.25" square mousing surface. All of these are detachable, facilitating assembly for users requiring either a right or left mousing zone.

With the palm rest installed there is about 7.5" of depth available for the keyboard. When the palm rest is removed that depth increases to 10.25". Due to the limited depth this tray is not recommended for use with central pointing devices. It also needs to be remembered that the palm rest runs the entire width of the tray and therefore has the potential to interfere with the appropriate use of many of the specialized ergonomic mice.

NOTE: This tray can be mounted on the Ovation Low Profile Leverless Arm.
Note: Trays such as the Phenolic Extra-Deep Low Profile Tray and the Extra-Deep ABS Plastic Low Profile Tray, by Fox Bay Industries, are better suited for central pointing devices.



Click Here for Models and Accessories Information

Models
Model #DescriptionSynnex SKU
WUB185-25WorkRite CB185-25 Keyboard Platform, 26.75" Wide x 11.5" Deep, Midnight Black





1


Copyright ©
Manufacturers Legal Notices Privacy