The HDPE Mini Keyboard Tray from KV Waterloo is ideal for situations where storage space for keyboard and mouse is highly restricted. With a width of just 19.4" and depth of 9.4", the tray is capable of accommodating virtually any keyboard. The rigid 0.5" thick tray is formed from HDPE (High Density Polyethylene) which is fully recyclable and features non-slip strips for secure keyboard placement. The included pivoting mousing surface is formed from 0.25" thick phenolic resin and includes a repositionable mouse guard and cable manager. The 9" diameter mousing surface is positioned 1.34" below the keyboard surface can be mounted to the right or left and pivots below the tray for storage. Included with the Mini Keyboard Tray is a removable gel-feel foam palm rest. The Mini Keyboard Tray features a universal mounting pattern for easy attachment to any KV Waterloo keyboard arm.

The compact dimensions of the HDPE Mini Keyboard Tray make it a perfect companion for the Tenor Trackless Keyboard Arm which was designed for the same highly restrictive space limitations. This combination of products offers the ultimate in compact keyboard storage.

HDPE Mini Keyboard Tray Mounting Hole Pattern

The Harmony Tray from KV Waterloo incorporates a mousing surface which can be pivoted through an arc toward the body on either the left or right side. The mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. Both left and right positions offer eight forward-angled settings which let the mousing surface be moved through an arc towards the torso, positioning it for the most ergonomic benefit. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 23" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 8" by 9" mousing surface will accommodate most mice but may not be suitable for use with some of the more specialized ergonomic mousing solutions with larger footprints as it has a 1/8" ridge along the side and back edges which limits the possible range of mouse movement.

The Harmony Tray has raised rubber anti-skid pads to prevent the keyboard from moving and is only compatible with keyboards at least 15” in width.

The Harmony Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Individuals who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.

The Transporter cart offers a space-saving solution for mobile PC use. It accepts all the components of your workstation, including keyboard, mouse, LCD display, CPU, laptop, printer, and power supplies. Its modular design increases efficiency and adjustability, and facilitates sit/stand use. The Transporter's construction is rugged yet lightweight, suitable for a variety of environments, from hospital and lab use to office or home. Components of the cart include:

• 60" Stainless steel pole with monitor mount (75 mm and 100 mm VESA compliant), with tilt and swivel
• 27" Aluminum base with five 3" casters (2 lockable)
• Keyboard extension arm
• Lockable CPU holder (9770S and 9740S models only)
• Peripheral shelf (for laptop or printer)
• Power and cable management
• Catch-all tray
• Harmony keyboard tray: Mousing surface can be positioned on the right or left, and rotates forward up to 20°. Anti-skid pads hold keyboard in place. 23" wide (32" wide with mousing surface extended) x 12.3" deep. Gel-like foam snap-in palm rest. Tray is black and composed of ABS plastic.

This CPU holder is storable (can slide 12" back on a 17" durable ball-bearing track) and also is equipped with a 360° swivel, making cable maintenance simple. It is available in a standard model (7356D) and also a Lockable (7366D) model. The lockable model has a chrome bar to prevent the case from sliding front to back in addition to the rubber grips on the sides of the holder which are on both models.

The Fixed CPU holder from KV Waterloo is non-storable and mounts in a fixed location. It is available in a non-lockable model (7301D) and also a lockable (7311D) model.

The Phenolic Keyboard Tray with Swing-Out Mouse Tray from KV Waterloo lets one create a wide variety of custom configurations for their input devices. The Keyboard Tray portion is 20.5" wide at the front and tapers slightly narrower (20") at the back. A depth of approximately 10" means the tray is large enough to accommodate even the largest keyboards with integrated palmrests. Two anti-skid grip strips are positioned to keep a full-size keyboard secure on the tray surface. The tray ships with a detachable Foam-Gel palm rest which reduces the maximum keyboard depth to 7", still enough space for most standard keyboards.

The detachable mouse tray provides an 8.5" diameter mousing surface and features a unique tilting and rotating pivot mount which can be used to position the mouse tray either level with the keyboard tray or at 0.5", 1.25", 1.5" or 2" above the keyboard tray. The inclination or tilt of the mouse tray can also be adjusted, independent of the keyboard tray orientation, to any angle from all height settings. A repositionable mouse guard with cord clip ensures that the mouse stays in place. The pivot permits the mouse tray to be swung into the position which best meets the ergonomic needs. The range is a full 360° at the highest settings and reduces to 90° as the elevation is lowered to level with the keyboard tray. The mouse tray attaches to the keyboard tray via a clamp mount which can be secured at any point around the edge of the tray, further expanding the customization options as it can be easily reconfigured between left and right positions.Note: The dimensions of the clamp may limit the use of very wide keyboards (such a the Microsoft Natural Ergo Keyboard 4000). As well, with the palm rest installed, the mouse tray mounting clamp must be positioned about 2" further from the body as the palm rest extends the full width of the keyboard tray.

This arm is similar to the standard Duet arm but offers storability along a 23" (58.4 cm) storage track, has slightly less range of movement and uses a paddle instead of a T-Pull for height adjustment.

Make your own custom tray or purchase our special 12" (30.5 cm) deep Duet Trays (in the Trays category). The 39" (99.1 cm) tray is wide enough for a keyboard, mouse, phone and notepad - a complete desk available for use while sitting or standing.

The Solo LCD monitor arm from KV Waterloo enables a full range of motion and ensures a high degree of monitor stability. Simple and easy to use with minimal workspace clutter, Solo is ideal for small workspaces and home offices. Designed to counterbalance monitor weights from 6 to 12 lbs, it makes adjustment of the monitor easy and simple. Features include:

• Low-profile mounting system and integrated cable management snap-on shroud
• Unique, multi-dimensional swivel system
• VESA standard mounting plate
• Swivel adjustment on arm base and mounting head
• Tension control knobs
• Gromment mounting option included

The Concerto Height Adjustable Arm from KV Waterloo is a stylish, easy-to-install pole-style monitor arm. This double extension arm swivels about the base 360°, with the double extension mechanism allowing forward and back movement up to 24". The 30" pole allows ample height adjustment as needed. Mounting options include both desk clamp and grommet hole configurations, with potential for addition mountings for panel, wall, and slatwall setups (not included). This unit also comes with cable management to hide unseemly cables, and fits monitors complying with VESA 75mm and 100mm hole patterns.

This version of the Momentum Arm swivels in two locations. The 'elbow' can swivel 45° to either left or right, while the 'shoulder'(where it mounts to the underside of the track) will rotate the usual full 360°. This makes this unit ideal for corner applications, or any workstation where an 'off-centre' mount of your keyboard arm is required (e.g. no suitable mounting in the ideal location). Using the dual swivel capabilities it is possible to position the tray up to 5.5" to either the left or right of the track mounting point.

The 23" storage track lets you get the arm out of your way when not in use. It has the Lift and Lock height adjustment, and a soft touch knob to tilt the platform to the desired angle. Accepts all standard trays.

Looking for Trays? - see our Tray Category