The DIADEM Return Table Tops from ErgoVerse are intended as companion tops for the DIADEM Waterfall Table Tops. When added to a DIADEM Waterfall Table Top the combination of the two creates a traditional L-shaped desk with a 29" deep primary section and a 23" deep return. The DIADEM Return Table Tops can also serve as a stand-alone desk surface for those with less room. The DIADEM Return Table Tops retain the same focus on functional organic form and distinctive look as do the DIADEM Waterfall Table Tops. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wrap the lamination film around the contoured edges, resulting in a fully sealed top. The satin finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Return Table Tops are finished with melamine to add further protection.

DIADEM Return Table Tops are 23" deep and available in 2 widths (41" and 53"). Both sizes are available in the same 6 colours - 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) and 2 solid colours (Black and Grey) as the DIADEM Waterfall Table Tops.

Les DIADEM Return Table Tops d'ErgoVerse sont conçus pour être complémentaires pour les dessus de table Diadem Waterfall Table Tops. Lorsqu'il est ajouté à un dessus de table Diadem Waterfall Table Top, la combinaison des deux crée un bureau traditionnel en forme de L avec une section primaire 29 po de profondeur et un retour 23 po de profondeur. Les DIADEM Return Table Tops peuvent également servir de surface de bureau indépendant pour ceux qui ont moins d`espace. Les DIADEM Return Table Tops conservent le même accent sur la forme fonctionnelle et l'aspect distinctive que les DIADEM Waterfall Table Tops. Ces dessus de table (table top) ont un centre qui est construit de MDF d`un pouce épais, et sont usinés avec un profil de cascade et des coins arrondis qui éliminent les points de pincement. Un film robuste de stratifiés haute pression est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et d'enveloppe sous vide le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film stratifié satiné est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au MDF du centre. Les dessous de toute les tables DIADEM Return Table Tops sont finis avec de la mélamine pour ajouter au protection.

Les DIADEM Return Table Tops sont de 23 po de profondeur et sont disponibles en 2 largeurs (41 po et 53 po). Les deux tailles sont disponibles 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris) comme les DIADEM Waterfall Table Tops.

The RISON Leaning Stools from ErgoVerse offer the options of sitting or leaning throughout the workday. The non-vertical, or leaning, stance effectively reduces the weight load on the joints of both the legs and the feet as the stool, rather than the legs and feet, becomes the load bearing support. The upright position also significantly reduces the effort required to return to a fully standing position. The shock absorbing effect of the gas spring provides additional comfort when weight is brought to bear on the seat.

The fixed seat offers an infinitely adjustable height range via the gas spring and a forward-locking tilt adjustment ranging from 5° to 20°. The durable self-sealed polyurethane seat is easily cleaned and provides a firm yet cushioned seating surface with raised texture bumps for improved comfort. Model RLS-B-11120 also features a firm polyurethane back support with independent angle adjustment to ensure that a comfortable upright posture can be maintained regardless of the chosen seat angle.
Note: The back on the RLS-B-11120 has a 2.5" deep curvature in the middle, is 14" wide, and has firm edges. Those with broader frames may find the back on this model too narrow and deep for a comfortable fit. The EZSIT Leaning Stool features a broader back better suited to those of broader build.

The heavy-duty textured black tubular steel base on the RISON Leaning Stool is designed for industrial settings but functions well in many offices, providing strength and stability. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.

Two different cylinder options are available on the RISON so that there is a RISON which is the right height range for everybody. Most will be able to take advantage of models RLS-11113 and RLS-B-11120 (back version) that offer a seat height adjustable from 26" - 35.5" and are suited to heights from about 5'2" up to 6'6". The model RLS-S-11130 is intended for shorter individuals and should accommodate those of heights ranging from 4'5" to 5'5".

The EZSIT Leaning Stool from ErgoVerse is a sturdy leaning or sitting stool that offers a larger-than-average seating surface, combined with extra cushioning for superior comfort. Height adjustment is accomplished via a gas spring that also serves to absorb impact as one lowers themselves onto the seat.

The EZSIT Leaning Stool models were developed in response to client feedback about other options in sit-stand seating. Many found the seats and backs on other models too small and narrow, making those models uncomfortable for extended work sessions. The EZSIT Leaning Stool, with its increased cushioning and greater surface areas, can provide comfort and support to a full range of builds and sizes, especially for lengthy work sessions. The large 18.7" by 13" seat tilts from 0° to 15° to accommodate both sitting and leaning and generous padding provides support without sacrificing comfort. Models ELS-B-11122 and ELS-B-S-11128 include a matching, heavily padded and oversized back with a shallow curvature to accommodate broad-backed individuals. Independent angle adjustment on the back of these models ensures that a comfortable upright posture can be maintained regardless of the chosen seat angle.

Two ranges of seat height adjustment are available to provide seating options for people ranging in height from barely 5' tall to 6'6" tall. Those up to 5'9" tall should consider model numbers ELS-S-11128 or ELS-B-S-11129 (seat height adjustment ranges from 24" to 31"), while those who are between about 5'6" tall and 6'6" tall should consider model ELS-11122 or ELS-B-11123 (seat height adjustment ranges from 28" to 37").

Those who have adopted a leaning or semi-seated stance over either traditional seating or full-time standing may well appreciate the extra comfort offered by the EZSIT Leaning Stool.

With a seat height range of 23.75" - 33.1", the STEPL Drafting Chair from ErgoVerse can provide those working at fixed-height elevated workstations a stable and comfortable seat. The STEPL features a wide seat and back rest, both with 2" thick padding for comfort. The angles of the seat and back rest are independently adjustable, with the back rest also adjustable in height, features that let each person to position support where it is most beneficial. Seat height adjustment is via a standard gas spring lift that also provides a shock-absorbing effect.

Two footrest options are available. Models SDC-BLK-05004 and SDC-GRY-07033 are equipped with a large 22.8" diameter heavy steel foot ring that provides a convenient 360° of fixed support for the feet. Model SDC-BLK-07030 features a 120° steel footrest with an aggressively treaded surface for safety. Both foot rest options can be positioned as low as 7.5" off the floor or can also be secured at greater heights if necessary.

All models have oversized 27" diameter Brushed Aluminum bases for stability. Safety glides ensure safety when mounting and dismounting from the chair.

STEPL Drafting chairs are upholstered with supple imitation leather. Model SDC-BLACK-05004 is available in Black, SDC-BLK-07033S is available in Anthracite Grey with red accent stitching, and Model DC-GRY-07030 is available in Black, with red accent stitching.

The STEYBIL Leaning Stool from ErgoVerse permits individuals to sit or lean while working, thereby reducing the weight load on the joints of both the legs and feet. This upright position also makes it easy to return to a fully standing position with minimal effort. The STEYBIL seat offers an infinitely adjustable height range from 24" to 34" and a forward-tilt that locks in at any point between 5° and 20°. For those whose work may require a degree of turning or who must get on and off the seat on a regular basis, the seat also provides a full 70° of swivel range (35° to either side) with an automatic return to centre.

The STEYBIL is now available with several seat options. One model features a formed polyurethane seat that provides a firm yet cushioned seating surface with cooling airflow channels. This model is well-suited to environments where rough use may be encountered as the seat is highly resistant to cuts or punctures and can also be easily cleaned. Three other models all feature a softer polyurethane foam base covered with easily cleanable leatherette. There is also a fifth model that has the same softer seat but with a breathable woven fabric cover for greater seating comfort.

Equally suitable for office or industrial settings, the textured black tubular steel base provides strength and stability in a small footprint that does not present a tripping hazard. Strong nylon feet engage the floor to ensure firm positioning of the seat, and the incorporated rollers permit the stool to be easily moved between workstations.

Le STEYBIL Leaning Stool (un tabouret assis/debout pour s'appuyer contre) d'ErgoVerse permet aux individus de s'asseoir ou de s'appuyer contre tout en travaillant, réduisant ainsi la charge sur les articulations des jambes et des pieds. Cette position verticale permet également de revenir facilement à une position entièrement debout avec un effort minimal. Le siège STEYBIL offre une gamme d'ajustement infinite en hauteur de 24 à 34 pouces et une inclinaison vers l'avant qui se verrouille en tout point entre 5° et 20°. Pour ceux dont le travail nécessite un certain degré de rotation ou qui doivent monter et descendre du siège régulièrement, le siège offre également une gamme de pivotement de 70° (35° de chaque côté) avec un retour automatique au centre.

Le STEYBIL est maintenant disponible avec plusieurs options de siège. L'un des modèles à un siège en polyuréthane moulé qui offre une surface solide, toutefois rembourré, et qui écoule l'air rafraîchissant. Ce modèle est bien adapté aux environnements industriel, car le siège est très résistant aux coupures ou aux perforations et peut également être facilement nettoyé. Trois autres modèles ont un siège plus mou/souple en mousse de polyuréthane recouverte de similicuir facile à nettoyer. Il existe également un cinquième modèle qui a le même siège mou, mais en tissu (fabric) respirant pour un plus grand confort d'assise.

Convenant aussi bien au bureau qu'à l'industrie, la base acier qui est en forme tubulaire noir texturé offre force et stabilité dans un espace réduit qui ne présente pas de risque de trébuchement. Des pieds fait en nylon solide s'engagent avec le plancher pour assurer la position solide du siège, et les rouleaux intégrés permet de déplacer le tabouret entre des postes de travail différentes.

The SEET Leaning Stool from ErgoVerse is a lightweight portable leaning or perching stool with an integrated handle and rollers for ease of movement between work stations. The 16.5 pound SEET is suited more to short-term leaning or resting rather than as a long-term seat.

The tubular steel base supports a gas spring lift that helps to minimize impact when weight is brought to bear. It provides seat height adjustment from 24.8" to over 33". The unique "cylinder roll" seat is 12.75" wide, with a diameter of 3.5" and is formed from sturdy self-skinned non-absorbent polyurethane foam that is highly resistant to nicks or cuts. Deep cut ribbing on the roll provides a textured surface to facilitate airflow and helps to keep skin cool, dry and comfortable.

The heavy-duty textured black tubular steel base on the SEET provides strength and stability ideal for industrial settings but can also function in any location. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.

The SRLYN Perching Seat from ErgoVerse offers those working at height-adjustable workstations the option of an elevated perching seat or a leaning stance. The SRLYN helps to reduce strain on the legs and feet as well as on the muscles of the lower back and core. The leaning position also minimizes the effort required to return to a fully standing position and permits a greater range of motion and greater reach than does a standard seated position.

The SRLYN Perching Seat features an infinitely adjustable height range from 26.4" to 35.8" and locking forward tilt adjustment from 5° up to 20°. The 14.2" wide by 12.6" deep formed polyurethane seat provides a large firm cushioned seating surface with an integrated handle for ease of movement. (Note: Individuals under 5'6" may find this seat too high but those who are taller might benefit from its greater upper range as it can accommodate heights up to 6'6".)

Strong nylon glides engage the floor to ensure secure positioning of the seat. The convenient integrated handle can be used to tip the SRLYN onto the small transport rollers incorporated into the rear glides for movement about a workspace. The unique design of the heavy-duty textured black tubular steel base maximizes stability while also greatly reducing the risk of tripping for passersby. Though this ruggedly designed seat has an industrial look it can also work well in an office setting.

The RSTMOR Drafting PLUS Chair from ErgoVerse is specifically designed to meet the needs of those of larger build. Dual rectangular steel tube construction rated to support up to 440 pounds and extra-thick padding on the larger-than-average seat are combined with easy adjustability to create a chair that is both functional and durable. The RSTMOR chair also offers individuals the option of sitting at a greater height than traditional chairs, which can significantly reduce the stress to which the knees are subjected with repetitive sitting and standing from a standard chair height. An adjustable footrest provides relaxation for the feet and lower legs, especially convenient if working at a raised counter that requires a greater seat elevation. For individuals who are working in a warehouse or assembly environment with raised counters this seat can enable them to reduce the load on their legs and joints by letting them sit while still being able to reach the work surface. The chair also folds for storage.

The NOSTND Perching Comfort PLUS Saddle Seat from ErgoVerse is designed to position the torso and arms as close as possible to a raised workstation, particularly those built on top of base cabinets or shelves. Unlike the seats on a leaning seat or traditional stool, the large plush saddle on the NOSTND is designed to be straddled. Seated posture on the NOSTND is more upright, with the heels positioned behind the bend of the knees, rather than extended forward of the knees as they would be in a leaning position. This posture allows individuals to move in much closer to flat-fronted work surfaces than might otherwise be possible. See this image of the TULEAN Leaning Stool, also from ErgoVerse, for an illustration of this latter position). As a result, the NOSTND Perching Comfort PLUS Saddle Seat helps to reduce the risk of overreach injuries to the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. By providing a centrally supported seat that bears the upper body weight, the NOSTND also helps to reduce the load generally borne by the feet and legs. Overall fatigue, and the risk of strain on the joints and tissues of the lower limbs can be greatly reduced.

Both the saddle style seat and the large back feature 3" cushioning; and both are height adjustable. The height of the seat can be adjusted between 23.25" and 28.75". The height adjustment range of the back is determined by the seat position. A convenient handle and large rollers on the rear glides let the NOSTND be moved with ease when required. The NOSTND dual rectangular steel tube base is rated to support up to 440 pounds.

If a more traditional style of seat is preferred, the RSTMOR Drafting PLUS Chair, which is also rated to 440 pounds might be a consideration.

Le NOSTND Perching Comfort PLUS Saddle Seat d'ErgoVerse est conçu pour positionner le torse et les bras aussi près que possible d'un poste de travail surélevé, en particulier ceux construits sur des armoires basses ou des étagères. Contrairement aux sièges des chaises inclinés ou des tabourets traditionnels, la grande selle en peluche du NOSTND est conçue pour être chevauchée. La posture assise sur le NOSTND est plus droite, avec les talons positionnés derrière le pliage des genoux, plutôt qu'étendus devant les genoux comme ils le seraient dans une position de s'appuyer contre. Cette posture permet aux individus de se rapprocher des surfaces de travail à front plat plus que cela ne serait possible autrement. (Voir cette image du TULEAN Leaning Stool, également d'ErgoVerse, pour une illustration de cette dernière position). De cette raison, le NOSTND Perching Comfort PLUS Saddle Seat contribue à réduire le risque de blessures aux épaules et au dos dues à l'extension excessive, ainsi que le risque de blessures aux muscles des côtés et de la section médiane causées par le fait de s'asseoir latéralement le long de la base du poste de travail et de se tordre à la taille pour se rapprocher suffisamment de sa surface. En offrant un siège à support central qui supporte le poids du haut du corps, le NOSTND contribue également à réduire la charge généralement supportée par les pieds et les jambes. La fatigue générale et le risque de tension sur les articulations et les tissus des membres inférieurs peuvent être considérablement réduits.

Le siège de style selle aussi que le grand dossier sont dotés d'un rembourrage de 3po et sont tous deux ajustable en hauteur. La hauteur du siège peut être ajusté entre 23.25po et 28.75po. La gamme d'ajustements de la hauteur du dossier est déterminée par la position du siège. Une poignée pratique et de grandes roulettes sur les patins arrière permettent de déplacer facilement le NOSTND lorsque cela est nécessaire. La base à double tube d'acier rectangulaire du NOSTND est conçue pour supporter jusqu'à 440 livres.

Si un style de siège plus traditionnel est préférer, la chaise RSTMOR Drafting PLUS Chair, qui est également conçue pour supporter 440 livres, peut être considérer.

The LOTAH Perching Comfort Saddle Seat from ErgoVerse is well-suited to applications where work must be performed on surfaces positioned over cabinets or shelves. The LOTAH features a large plush saddle that is straddled. This straddle posture positions the heels behind the bend of the knees, rather than extended forward of the knees as they would be on a leaning stool. (See this image of the Tulean Leaning Stool, also by ErgoVerse, for an illustration of this latter position.) This posture keeps the back in an ergonomically desirable upright orientation, while positioning the torso much closer to flat-fronted work surfaces than is possible with other seating or leaning solutions. As a result, the LOTAH Perching Comfort Saddle Seat helps to reduce the risk of overreach injuries to the muscles of the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. The LOTAH Perching Comfort Saddle Seat also helps to reduce the load borne by the feet and legs for those who work at elevated workstations by transferring the majority of weight onto the seat. As a result overall fatigue is reduced with an accompanying improvement of the ability to maintain focus and concentration.

Built on a heavy tubular steel base with a gas spring that enables a height adjustment range of 24.8" to 31.5", and with a seat that has 15° of tilt range and 3" of cushioning, the LOTAH offers individualized comfort and long-term durability. Rollers built into the rear glides also let the LOTAH moved across hard-surfaced floors with ease.