The 501-27 Series from Conset allows the entire workstation to be raised and lowered easily and quickly at the touch of a button, offering a cost effective solution for sit-stand or multiple-user workstations. The Triple Nested Column design ensures stability throughout the 26" range of adjustment. The frame height adjusts from 21" to 47" at 1.2" per second with a lift capacity of 220 lb. The Anti-Squeeze Protection System will automatically engage if the resistance increases noticeably while the table top is moving down. (Note: it is important to add the thickness of the table top to the frame height to determine the final working height.)

The 501-27 bases will support a wide variety of work surfaces ranging in depth from a minimum of 18" to a maximum of 48" (Note: mounting deeper 36" - 48" work surfaces requires the installation of the 501-27 Support Extender Accessory to ensure stability.) With five model widths available, in either black or silver, these frames can accommodate tops ranging in width from 33" to over 68".

A 2-leg frame with a rectangular top is the most popular option. THe 501-27 frame comes in widths 32 7/8" wide to 67 3/4" wide. If an L-shaped workstation is preferred, the 3-leg model (available in silver only) which has a 59 13/16" wide front and 56 7/8" wide return could be considered.

Need a table top? Consult our base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

La série du 501-27 de Conset permet toute la surface de travail de ce faire relevée ou abaissée facilement avec un interrupteur de sécurité a double bouton, vite fait, en offrant une solution économique pour assis/debout ou pour les  postes de travail pour multi-utilisateur. La conception de la colonne emboîté trois fois assure la stabilité partout la gamme de 26 po d'ajustements. La hauteur du piétement est ajustable de 21 po jusqu'à 47 po à 1.2 po par secondes avec un capacité de levage de 220 livres. Le système protectante de Contre Pression engage automatiquement si le poids augemente considérablement quand le dessus de table abaisse. (Veuillez noter: il est important d'additioner l'épaisseur du dessus de table (table top) aux mésurement de l'épaisseur du hauteur du piétement pour déterminer la hauteur finale de travail.)

Les piétements du 501-27 soutiennent une gamme de surfaces de travail de grande variétés avec profondeur variant de 18 po minimal à 48 po maximum. (Veuillez noter:  l'assemblage des surfaces de travail plus profondes, c'est à dire, entre 36 po à 48 po, exige l'instalation de l'accessoire 501-27 Support Extender pour assurer la stabilité.) Avec des modèles de cinq largeurs différentes, argenté ou noir (l'un ou l'autre), ces piétements peuvent recevoir des dessus de tables (table tops) variants de largeur de 33 po jusqu'à plus que 68 po.

Le piétement à 2-pattes est la configuration de table la plus populaire pour la majorité des usageurs, et mésure 32 7/8 po de largeur jusqu'à 67 3/4 po de largeur. Si une surface de travail qui forme un L-Shape est préférable, choisissez la modèle a 3-pattes (seulement disponible en argenté) qui a une largeur du devant de 59 13/16 po et un retour avec largeur de 56 7/8 po.

Avez vous besoin d'un dessus de table (table top)? Consultez notre graphique base/tabletop compatibility chart.

The 501-37 Series from Conset follows an open design concept, giving lots of open space between the base legs as there is no lower crossbar. The height-adjustable base allows the entire workstation to be raised and lowered easily and quickly at the touch of a button for variable tabletop widths (from 46" to over 60"). The Triple Nested Column design ensures stability throughout the 26" range of adjustment. In addition, the frame height adjusts from 21" to 47" at 1.2" per second with a lift capacity of 220 lbs. The Anti-Squeeze Protection System will automatically engage if the resistance increases noticeably while the table top is moving down. (Note: it is important to add the thickness of the table top to the frame height to determine the final working height.)

The 501-37 bases support a wide variety of table tops ranging in width from 46" to over 60" and in depth from a minimum of 18" to a maximum of 30".

Need a table top? Consult our base/table top compatibility chart base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

The 501-27 Series from Conset allows your entire workstation to raise and lower easily and quickly at the touch of a button, offering a cost effective solution for sit/stand or multiple-user workstations. The 3-Leg Triple Nested Column design provides significantly more stability than any 2-Leg base throughout the full 26" range of movement, as the third leg also serves to brace the desk. The height adjusts from 21" to 47" at a rate of 1.2" per second, with a lift capacity of 220 lb. An Anti-Squeeze Protection System will automatically engage if the resistance increases noticeably while moving down.

The 3-Leg model is suitable for an "L" shaped workstation, the base having a 59 13/16" wide front and 56.875" wide return. With this base either a custom-made or pre-existing table top can be used (provided the dimensions are of sufficient size) or Conset's own 72-48SB and 24-24SB can be purchased (these are designed to work together in conjunction with this base to provide an "L" shaped table top). The entire base is powder coated in an attractive silver color.

The 501-29 Series from Conset allows the entire workstation to be raised and lowered easily and quickly at the touch of a button, offering a cost-effective solution for sit-stand or multiple-user workstations. Designed to meet the requirements of taller individuals, the Triple Nested Column design ensures stability throughout the entire 26" range, moving from 25" to 51" at 1.2" per second with a lift capacity of 220 lb. An Anti-Squeeze Protection System automatically engages if resistance increases noticeably while the table top is moving down. (Note: it is important to add the thickness of the table top to the frame height to determine the final working height.)

The 501-29 bases will support a wide variety of work surfaces ranging in depth from a minimum of 26" to a maximum of 48". With five model widths available in silver, these frames can accommodate tops ranging in width from 33" to over 68".

Need a table top? Consult our base/table top compatibility chart base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

The 501-49 Base from Conset brings elegant contemporary styling and improved flexibility to their line of sit/stand electric desk bases. A simple touch of a button will raise or lower the entire workstation - offering easy freedom to change working posture throughout the workday. The tubular leg design enables the removal of the usual lower traverse crossbar without any sacrifice in the stability of the frame. The result is a clean, contemporary, open design with nothing to interfere with leg movement. Black or silver frame colours are completed with chromed steel telescoping inner legs for a distinctive look. An expanding upper bracket permits 4" incremental width changes from a minimum of 45" to a maximum width of 69", making the 501-49 a very versatile desk frame. For those seeking a quieter unit, the 501-49 is substantially quieter than most other current Conset bases (i.e. 501-27, etc.).

The new design also yields an increased upper range - permitting the frame to elevate from 25" to 49" at a rate of up to 1.26"/second. The lower range is slightly higher than other frames but at 25" is generally acceptable for all except the shortest individuals.

The 20" deep upper bracket supports make the 501-49 ideal for most desktops and lifting up to 176 lbs. It will not, however, work with tops shallower than a nominal 21" depth.

Need a table top? Consult our base/table top compatibility chart base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

The 501-49 3-Leg Height Adjustable Base from Conset is designed for those who need an L-shaped desk and prefer no lower crossbars between the upright legs. Elegant and stylish in appearance, a simple touch of a button will raise or lower the entire workstation - offering easy freedom to change working posture throughout the workday. The distinctive tubular leg design enabled the removal of the usual lower traverse crossbar without any sacrifice in the stability of the frame. The result is a clean, contemporary, open design with nothing to interfere with leg movement. Black or silver frame colours are completed with chromed steel telescoping inner legs for a unique look. An expanding upper bracket permits 4" incremental width changes from a minimum of 45.6125" to a maximum width of 69.25" along the main bracket and 53" to 76.625", making the 501-49 versatile enough to accommodate a wide range of table top sizes. For those seeking a quieter unit, the 501-49 is also substantially quieter than most other current Conset bases (i.e. 501-27, etc.).

This design also yields an increased upper range - permitting the frame to elevate from 24.75" to 48.375" at a rate of up to 1.26"/second. The lower range is slightly higher than other frames but at 24.75" is generally acceptable for all except the shortest of individuals.

Suited for a wide range of table tops, the 20" deep upper bracket supports make the 501-49 ideal for most desktops and lifting up to 198 lbs. It will not, however, work with tops shallower than a nominal 21" depth.

The 501-32 Series from Conset allows the entire workstation to be raised and lowered easily and quickly at the touch of a button, offering a cost effective solution for sit-stand or multiple-user workstations. The Dual Nested Column design ensures stability throughout the 20" range of adjustment. The frame height adjusts from 26" to 46" at 1" per second with a lift capacity of 176 lb. An Anti-Squeeze Protection System automatically engages if the resistance increases noticeably while the table top is moving down. (Note: it is important to add the thickness of the table top to the frame height to determine the final working height.)

The 501-32 bases will support a wide variety of work surfaces ranging in depth from a minimum of 18" to a maximum of 48". (Note: mounting deeper 36" - 48" work surfaces requires the installation of the 501-32 Support Extender Accessory to ensure stability.) With five model widths available in silver, these frames can accommodate tops ranging in width from 33" to over 68".

Need a table top? Consult our base/table top compatibility chart base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

La série du 501-32 de Conset permet toute la surface de travail de ce faire relevée ou abaissée facilement avec un interrupteur de sécurité a double bouton, vite fait, en offrant une solution économique pour assis/debout ou pour les postes de travail pour multi-utilisateur. La conception de la colonne emboîté deux fois assure la stabilité partout la gamme de 20 po d'ajustements. La hauteur du piétement est ajustable de 26 po jusqu'à 46 po à 1 po par secondes avec un capacité de levage de 176 livres. Le système protectante de Contre Pression engage automatiquement si le poids augemente considérablement quand le dessus de table abaisse. (Veuillez noter: il est important d'additioner l'épaisseur du dessus de table (table top) aux mésurement de l'épaisseur du hauteur du piétement pour déterminer la hauteur finale de travail.)

Les piétements du 501-32 soutiennent une gamme de surfaces de travail de grande variétés avec profondeur variant de 18 po minimal à 48 po maximum. (Veuillez noter: l'assemblage des surfaces de travail plus profondes, c'est à dire, entre 36 po à 48 po, exige l'instalation de l'accessoire 501-32 Support Extender pour assurer la stabilité.) Avec des modèles de cinq largeurs différentes disponible en argenté, ces piétements peuvent recevoir des dessus de tables variants de largeur de 33 po jusqu'à plus que 68 po.

Avez vous besoin d'un dessus de table (table top)? Consultez notre graphique base/tabletop compatibility chart.

The 501-15 Series is an economical, width-adjustable option for the base of an electric workstation. The Extender Rod (Drive Shaft) connecting the two legs can telescope from 40.9" (104 cm) to 70.8" (180 cm), allowing this base to accommodate a wide range of tabletops. This unique telescoping feature means that purchasers must also supply a suitable privacy panel which matches the frame width. Industry standard twist-lock connectors are included with the frame (see image in gallery).

The height adjusts from 26" to 46.5" at a rate of 1" per second, with a lift capacity of 154 lb. An Anti-Squeeze Protection System will automatically engage if the resistance increases noticeably while moving down. High quality oversized levelers accent the feet of the base.

Due to its innovative adjustable width feature, this base will support a wide variety of stock work surfaces and most custom tops. The entire base is powder coated in an attractive silver color.

Need a table top? Consult our base/table top compatibility chart base/tabletop compatibility chart for recommended size options and then choose from our range of desk top options.

The 501-7 Series from Conset is the most cost effective electric workstation solution in the industry today. It is ideal for corner applications and will accommodate smaller tabletops with a total lift capacity of 154 lbs. The adjustment range is 26" to 46.5" at a rate of 1" per second.

This base will support most smaller custom worksurfaces and several stock tabletops. It includes wheels at the back of the base for easy movement when required (the wheels also feature brake locks to prevent undesired movement during use). Available in powder coated silver or black.

To find out which tabletops are compatible with this base, consult our base/tabletop compatibility chart.

The 501-19 Series from Conset is the perfect balance of form and function for a single column electric workstation. It is ideal for corner applications and will accommodate smaller tabletops with a total lift capacity of 220 lbs. The adjustment range is 26" to 46.5" at a rate of 1.1" per second.

This base will support most smaller custom worksurfaces and several stock tabletops. It is designed with stability and comfort in mind, offering more space under the desk for the feet of the user than the 501-7. If mobility is a requirement, an optional caster accessory and battery pack (for independent power supply) is available. Available powder coated in silver or black.