Altissimo Sit-Stand Workstation

The Altissimo Sit-Stand Workstation from KV Waterloo is an all-in-one solution for converting a sitting desk into a sit-to-stand desk. Mounted at the back, side or corner of the desk, this space-saving workstation effortlessly moves up or down using a gas spring mechanism and is easily stored when not in use. The Single Workstation (6011 Series) accommodates monitors from 5 to 20 lbs, while the Dual Workstation (6021 Series) handles monitors up to 8 lbs each and 24” wide (diagonally).

The height range of the Altissimo is an impressive 22” with the keyboard tray ranging from 5” below desk height to 17” above the desk. The monitor has an additional 9.5” of independent adjustment and can be tilted to 45° or rotated 90° from landscape to portrait orientation. In addition, the monitor tower can rotate independently of the worksurface 180° from left to right.

The keyboard tray is angle adjustable with 14° of negative incline and 4° of positive incline, while also being height adjustable relative to the upper platform. All these adjustable ranges make the Altissimo one of the most versatile sit-stand solutions available. (This model is slightly more versatile than the Altissimo-Plus Sit Stand Workstation, below.)

Note: Those who have already purchased the Single Workstation can upgrade to the Dual model by ordering the Dual Mounting Kit (6021AS60/6021E60). Available colours are Silver (with Gray Accents), Black (with Black Accents), and White (with Gray Accents) (Special Order only).

• Securely Clamps to Desk: Never worry about tipping or falling hazards with the clamping mechanism on the Altissimo Sit-Stand Workstation, which secures the Altissimo to the front of the desk.
• Wide Height Adjustment Range: With an ample 22" of height adjustment the Altissimo Sit-Stand Workstation has more than enough range for sitting or standing for the vast majority of workers. At the lowest range the keyboard tray goes 5.1" below the desk height allowing the keyboard tray to be lowered to a suitable height for even shorter indiduals on standard office chairs. This inability to lower the keyboard tray below the worksurface is a known concern with freestanding sit-stand retrofit desks.
• Solid Keyboard Tray: The aluminum keyboard tray is not only thin but more rigid than phenolic or plastic trays, so there is no fear of the tray warping or bending over time.
• Single or Dual Monitor Options: The Altissimo Sit-Stand Workstation comes in models for both single and dual monitors.
• Solid Construction Materials: The Altissimo Sit-Stand Workstation is solidly built of metal and hard plastics with a sturdy design for years of regular usage. The aluminum tray is also highly durable without adding bulk.
• Nearly Fully Assembled: The Altissimo Sit-Stand Workstation requires little assembly and can be used after about 15 - 20 minutes of installation time.
• Worksurface Included: The built-in upper worksurface of the Altissimo Sit-Stand Workstation allows additional work items to be placed between the monitor and the keyboard and mouse, such as documents, calculators, writing instruments, etc. This increases the overall work space for maximum efficiency and optimal ergonomics.
• Reversable Desk Clamp: Depending on the depth of the table top, the clamp can be mounted in one of two directions in order to give extra horizontal reach if necessary.
• Flip Up Keyboard Tray: In smaller spaces where a smaller footprint is needed, the keyboard tray can be flipped up in a stored configuration in order to save space. The keyboard and mouse are stored on the upper worksurface.

• Vertical Range: 22”
• Weight Capacity: 5 - 25 lbs (max), 5 – 20 lbs (for monitor/s)
• Keyboard Tray: 28” x 9” (includes mousing area)
• Keyboard Tray Adjustment: 3.25” (independent of worksurface)
• Keyboard Tray Material: Aluminum
• Keyboard Palm Support: Included, Removable
• Max Monitor Size: 24” each (Dual only)
• Monitor Adjustment: 45° tilt, 90° rotation
• Monitor Height Adjustment: 9.5” (independent of worksurface)
• Monitor Mounting: VESA plate (Quick connect)
• Adjustment Mechanism: Gas Spring
• Cable Management: Yes (integrated into unit)
• Mounting Options: Clamp or Grommet
• Colour Options: Silver with Gray Accents or Black with Black Accents
• Warranty: 5 years limited
• Package Contents: Altissimo Sit-Stand Workstation, Assembly Hardware, Assembly Instructions

• Move between standing and sitting on a regular basis. If you are just starting out with a sit-stand desk, maintain yourself in the standing position for brief intervals - don't try to stand for extended periods until your body has adjusted and become comfortable.
• If you find standing tiring, consider purchasing a quality anti-fatigue mat which can significantly increase your comfort by enabling your feet and legs to shift slightly while you work.
• Consider a "leaning" style of seat rather than going back to the standard office chair. Using a seat such as this can ease the load on the feet and legs while still providing most of the benefits of the fully upright standing posture.