Kanewell Twin Compact Adjustable Saddle Seat

The Kanewell Twin Compact Adjustable Saddle Seat was developed to provide those of smaller or more slender build with a seating option better suited to their needs. This saddle stool features a comfortable split-saddle seat with the added benefit of splay and tilt adjustment for a personalized fit. The primary design is very similar to other Kanewell Twin Saddle models, with the saddle offering the same amount of cushioning and the same degree of splay at the front. However, because this seat is specifically intended for those of smaller build, the seat halves do not separate at the rear as on the full-size Kanewell Twin saddles, but rather pivot from a single point at the rear of the saddle to achieve the outward splay at the front. In addition to the splay feature the saddle also features the same locking tilt that permits individuals to position the seat at an angle that is most suitable for their needs or comfort.

Saddle seats are well-suited for use in active office environments, at raised counters, elevated workstations, or anywhere there is a need to be able to move into close proximity to the working area—such as dental, medical, or veterinary practices. The upright posture provided by the saddle-seating encourages better back posture, provides a much greater range of movement than that available from traditional seats, and enables virtually effortless movement about a workspace. The split-saddle is designed to reduce pressure points and improve airflow for a cooler and more comfortable experience, especially during longer periods of concentrated work. In order to meet the needs of those of smaller build the saddle on the Kanewell Twin Compact Adjustable Saddle Seat is both narrower and shallower than the standard seat (see comparison here). As well, as has been described earlier, it also has much less separation (see comparison here).

Upholstered in high grade Vinyl that is waterproof and resistant to most common cleaners and disinfectant formulations, the Kanewell Twin Compact seats are available in two height ranges to accommodate individuals of varying heights. Large diameter (60 mm) casters offer smooth movement throughout the workspace. Optional accessories include a footring to provide stability and comfort support when the chair is elevated (the height of the footring is adjustable independently of the height of the chair), the 360° Arm Accessory, and fixed glides as an alternative to the casters.

* Note: Saddle seats are not typically promoted with backrests as the saddle stance naturally encourages better back posture. The addition of a backrest may also limit movement and reduce the ergonomic benefit of a saddle-style seat, as there can be a tendency to relax against the back, reducing the level of core muscle engagement. It is also more difficult to mount and dismount from a saddle when a backrest is present. If a backrest is desired the Kanewell Twin Compact Adjustable Saddle Chair with Articulating Backrest is available as a backrest version.

• Compact Saddle Dimensions: The Kanewell Twin Compact Adjustable Saddle Seat features a noticeably smaller saddle than other Kanwell models. The seat is both narrower and shallower to provide a more suitable fit for those of small or slim stature.
• 2 Height Options: The Kanewell Compact Saddle Stools are available in two different heights to let individuals choose what best works for their height. (see "Determining Your Saddle Height" in the User Tips Section)
• Split Saddle Design: Split Saddle stools are designed to provide support in the right places. Weight is spread across, and borne primarily by, the sitting bones. A saddle seat at the correct height will also generally transfer some weight onto the insides of the thighs which further aids in spreading the weight over a larger surface area. By removing the central crown of the saddle, the risk of concentrating weight over a small and sensitive zone is eliminated. The split design also encourages natural convective cooling airflow, resulting is a more enjoyable sitting experience than that offered by traditional chairs or one-piece saddle seats.
• Adjustable Splay: The Split Saddle design of the Kanewell Saddle Stools also includes the ability to customize the splay - the angle at which the seat halves interact according to personal preference. See "Splay Adjustment" under the Usage Tips section for details on how to accomplish these adjustments.
• Adjustable Tilt: The forward tilt feature lets individuals add additional tilt to the pelvis if they wish to enhance their upright posture. In addition, it aids in relieving lower pelvic pressure by lowering the front of the saddle seat.
• Easy Rolling: Kanewell Saddle Stools are equipped with 60 mm casters (for hard floors). A simple push/pull action with the feet enables one to manoeuvre around a work area with minimal effort.
• Quality Upholstery: The Kanewell Twin Compact Saddle Stools are available upholstered with high quality vinyl that is waterproof and resistant to most common cleaners and disinfectant formulations, making it an ideal solution for environments where cleaning or disinfecting may be necessary.
• Weight Rating: Kanewell Twin Adjustable Saddle Stools are designed to safely support weights up to 300 lbs (136 kg).

• Recommended User Height Range:
  Short: 4'4" to 5'5"
  Medium: 4'7" to 6'1""
  
• Seat Adjustment Mechanism:
  Height: Hand Lever Release with Gas Spring assist
  Tilt: Hand Lever Release/Lock - manual adjustment
  Splay: Handwheel Release - manual adjustment
• Seat Dimensions:
  Depth (front to back): 12.75" (32.4 cm)
  Width:

  • Minimum Splay: 12" (30.5 cm)
  • Maxium Splay: 13" (33.0 cm)
• Upholstery Materials: Vinyl, Firm Polyurethane Foam Cushioning
• Base: Brushed Cast Aluminum
• Base Diameter: 22" (56.0 cm)
• Casters: 60 mm, free-rolling (optional Fixed Glides available for purchase)
• Weight Rating: 300 lbs (136 kg)
  
  
• Warranty: 3 Years
• Package Contents: Kanewell Twin Compact Adjustable Saddle Seat, Assembly Instructions

• When considering a Saddle Stool it is wise to consider the entire workstation. The reason behind this is that an appropriately positioned saddle-style seat will elevate you significantly higher than does a standard office chair. This means that other factors such as keyboard/mouse and monitor heights will need to be adjusted to bring them up to an appropriately ergonomic position. Failing to address these factors will usually result in you keeping the saddle positioned too low and losing most of the benefits which the saddle seat might otherwise offer OR potentially introducing other ergonomic issues while trying to reach a workspace which is positioned too low. If you have questions regarding solutions to these problems please feel free to call for assistance in addressing these concerns.
• Selecting the appropriate model of the Kanewell Saddle Stool can be done by simply comparing your height to the recommended user height ranges indicated for each model. If you happen to be at the upper height range for the Short Model you may want to move up to the Medium cylinder version. There is a significant enough overlapping range between these two models to ensure that the Medium version will still provide a range of adjustment both above and below your optimal setting. If you have doubts please give us a call and we will assist you in this selection.
• Splay Adjustment can be accomplished by loosening the handwheel located below the front of the saddle. It is recommended to release the locking mechanism by several turns prior to attempting to adjust the splay angle of the seat halves. Once the chosen width or splay angle is set you simply tighten the handwheel to re-engage the locking system.
  Note: The locking mechanism is friction-based and may require that some effort be exerted when performing initial adjustments.
• When setting the height of the seat, you want to have your thighs angled downwards at roughly 45° as this position provides optimal pelvic tilt for most individuals. This will also usually align the thighs with the angle of the seat halves, permitting them to naturally rest against the saddle and reducing the risk of pressure points on the inside of the thighs.
• Be careful to not lower the seat significantly lower than where the thighs are at the optimum 45° angle. Sitting in this manner changes the angle at which the pelvic bones contact the seat and concentrates your weight over a small area along the upper ridge of the seat halves. This will for most people not only be uncomfortable but also pushes the lower spine into an unnatural C-curve. This posture exerts undue stress on the lower back and spine and greatly reduces the effectiveness of the Saddle Stool posture.
• Moving about a workspace with the Kanewell Saddle Stool is much easier than moving a traditional office chair. Since the saddle posture provides your legs with a much wider range of motion, both feet can be employed to perform a push/pull action. Movement in any direction can accomplished with the minimum of effort.
• Saddle-style seating does require an adjustment period. We encourage you not to try to perform marathon work sessions in the first days of use. Rather, take the time to break your muscles and joints into this new posture. Take breaks, use your old chair, stand up and stretch, and even walk around. Also, expect that over the first days and even weeks you may find that there is sensitivity. Adjust the seat to reduce pressure points or ridges, fine-tuning the seat position to meet your requirements. Typically, equestrians and cyclists will almost certainly adapt very quickly since their bodies are already acclimated to this style of seat.