ABS Plastic Low Profile Tray

At only 0.375" thick, the ABS Low Profile Tray from Fox Bay Industries encourages individuals to find the most beneficial position for the keyboard without having to accommodate uncomfortable obstructions beneath the tray. When placed on the ABS Plastic Low Profile Tray, especially one installed on a keyboard arm with a similarly slim mounting bracket (such as the Ovation Low Profile Leverless Arm) a keyboard can be comfortably positioned at thigh level, and/or at a negative incline (tilted down) without restricting movement of the knees or thighs.

Note: To be sure this tray will fit an existing keyboard arm, please compare the mounting hole pattern on the installed arm with the Mounting Hole Pattern on the diagram.

The simple, clean design of the ABS Low Profile Tray is also free of obstructions on its upper surface, (such as raised edges or built-in wrist rests) that could increase the risk of injury to the sensitive pressure points on the underside of the wrists. The rear edge is raised to keep the keyboard in place when the tray is at a negative incline, and is notched in two places to route cables.

Composed of rigid ABS Plastic, and eleven inches deep (from front to back), the ABS Low Profile tray can accommodate specialty ergonomic keyboards (including adjustable or separated keyboards). The tray is available in widths of 30", 27", 24", 22", 20" and 18", with the 30" tray large enough for practically all keyboards and pointing devices.

• Spacious: Room for both a pointing device and a separate keypad. See "Usage Tips" for determining the necessary width.
• Keyboard Guard: Ensures keyboard and input devices stay in place when the tray is negatively inclined.
• Cable Management: Left and right slots in the keyboard guard allow for easy routing of cables from tray to computer.
• Durable: High quality ABS Plastic construction provides a firm surface with minimal bounce and flexion, yet is sufficiently resilient to prevent cracking or chipping from accidental impacts.

• Width:
  FB-T30x11: 30.0" (76.2 cm)
  FB-T27x11: 27.0" (68.6 cm)
  FB-T24x11: 24.0" (61.0 cm)
  FB-T22x11: 22.0" (55.9 cm)
  FB-T20x11: 20.0" (50.8cm)
  FB-T18x11: 18.0" (45.7 cm)
• Depth (front-to-back): 11.0" (27.9 cm)
• Height of Keyboard Guard: 1.0" (2.5 cm)
• Tray Thickness: 0.375" (1.0 cm)
• Warranty: 1 Year
• Package Contents: ABS Plastic Low Profile Tray, Mounting Hardware Kit

• Determine the width of your keyboard tray by considering what input devices you wish to position on the tray. Measure out the widths of these devices, allowing at least 8" of width for mouse movement (sometimes more depending on the mousing device you will be using). A rule of thumb is to get the widest tray your workstation can accommodate. Make sure that when mounted on a keyboard arm your tray will have the necessary clearance. A wide tray will not be able to be raised above the surface of a corner workstation if the back corners of the tray cannot clear the desk.
  Note: Please contact us for strategies to address this.
• If you are a touch typist, position your ABS Plastic Low Profile Tray with a negative incline (if your keyboard arm is so equipped) and at a height that enables you to maintain a neutral wrist alignment. By raising the edge closest to you the wrist is naturally elevated above the fingertips and in line with the back of the forearm. The risk of restricting bloodflow or exerting pressure on the tissues is reduced or eliminated. This benefits both your keyboarding and mousing activity. Learn More About Positioning Your Keyboard Tray.
• If you are not a touch typist, you may find that a neutral or positive inclination is more appropriate for your method of typing. In addition, as a “hunt and peck” typist, you may prefer to position the keyboard higher than a touch typist would because you move your hands and arms more, and you aim for one key at a time.
• When selecting a Keyboard Arm on which to mount your ABS Plastic Low Profile Tray you should consider the range of elevation (above and below your worksurface), whether it supports a range of positive and negative inclination, and storability. Not all Keyboard Arms are equal and a higher price does not necessarily mean the best product. The ease of height and angle adjustment, and type of storage mechanism (steel ball-bearing is highly recommended) should be considered alongside the first set of criteria.