The RollerMouse Mobile by Contour Design is a compact version of the well-known RollerMouse Red, designed for mobility and ideally suited for use with compact keyboards. This central pointing device conveniently positions between the operator and keyboard space bar, keeping mousing activity "inline", i.e., in the area immediately in front of the keyboard, and eliminating the need to reach for a mouse. This also makes it suitable for use where there may be insufficient room for a mouse to be placed immediately beside the keyboard. Like all RollerMouse products, cursor movement is achieved by manipulating the tube-like cylindrical "rollerbar" with the fingertips. Rotating the rollerbar moves the cursor up and down, and sliding the bar from side to side accomplishes horizontal movement. Once the desired location is achieved, a left click can be generated by pressing down on the bar (the force required for this is adjustable from an ultra-light touch to highly tactile). Four tactile buttons and a clickable scroll wheel are located below the bar to generate left/middle/right clicks, copy, paste, and vertical scrolling. Cursor speed can be adjusted via a button on the right end of the RollerMouse Mobile, with five different speed settings from 600 to 3000 DPI. The RollerMouse Mobile also ships with two heights of rubber feet that can be used to elevate low profile compact keyboards to better match the rollerbar height. Controls can also be customized using the downloadable driver.

The RollerMouse Mobile is equipped with the same larger diameter rollerbar found on the RED, as compared to that on the FREE3 or PRO3. On the Mobile this 0.8" diameter bar is 3.875" wide and offers a finer degree of control, especially for vertical movement. The surface of the bar is textured with raised bumps that offer tactile feedback to further improve all aspects of cursor control. Innovative tracking technology on the RollerMouse Mobile further enhances cursor control, letting the Mobile work equally well on both single and multi-monitor workstations. All these design elements make cursor control more precise and effortless without compromising durability and the robust nature of the sturdy aluminum housing. To further improve the ergonomics even the traditional mechanical "click" has been replaced with a newer "virtual" clicking mechanism that generates a "percussion-free" but audible "click" that can be adjusted in volume or fully disabled if so desired.

Because the RollerMouse Mobile is designed for mobile use it offers features not available on the larger RollerMouse Red. The Mobile offers three connection options - to Bluetooth-enabled devices, via a an included 2.4 gHz wireless receiver, or as a wired device via the included charging cable. It also comes with a folding protective sleeve that attaches and closes magnetically.

While the RollerMouse Mobile can work perfectly well with any type or size of keyboard those using full-size or separated keyboards may wish to consider one of the full-size RollerMouse Models.

The Laptop Riser from Contour Design is designed to support laptops ranging in size from 11-15.6", as well as any standard tablet. It can even serve as a book stand or document holder if desired, offering a greater elevation than many other devices are able to provide. With sturdy metal construction and weighing in at 3.2 lbs, this stand is intended for deployment on a desk surface. The support lip can be as low as 1.8" when fully folded or as high as 6" when elevated. With the convenient friction adjustment it is possible to adjust this to any height and angle and it will securely hold that position. The 3.2 pound weight ensures stability for most applications but care still needs to be taken to keep the center of gravity positioned over the base.
Note: Laptop screen elevation is determined by the laptop dimensions, the height the stand is elevated to, and the angle at which the stand is set.

The Universal ArmSupport from Contour Design offers relief to the shoulders and upper back. Mountable to any flat surface from 1" to 1.75" in thickness, the Universal ArmSupport provides support for the weight of arms, significantly lessening the load on the muscles of the shoulders and upper back while reducing the potential for fatigue, inflammation and pain in these muscle groups.

The Universal ArmSupport is especially suitable for non-traditional standing or leaning postures where there are no chair armrests to provide support. It is compatible with most standard style keyboards (i.e. those with a straight front without integrated palm supports), central pointing devices, and most mice with the symmetrical contours meaning it works for both left and right-handed use. The curved front wraps the arm supports around the torso to better position the support below the shoulders.

The Universal ArmSupport features a thick layer of foam that is supportive but still highly responsive to weight, easily contouring to eliminate pressure points. The leather-like surface is supple but still permits the arms to move with minimal resistance. The rounded water-fall edges eliminate any sharp edges. The rigid steel mounting plate can comfortably support up to 18 pounds and is secured to the surface using a unique tool-free clamping system that offers over 2 inches of mounting depth adjustment. No surface modifications are required and installation can be done in under five minutes.

Note: Arm and hand support solutions that elevate the hand above the mousing surface can subtly change hand placement on some specialized mousing devices, potentially affecting the manner in which the hand interacts with the devices and possibly limiting the ergonomic benefits generally associated with them. With some products these changes may be more significant than with others. Please call to speak with a Customer Service Specialist to discuss the compatibility of this product with the intended pointing device.

The Contour Portable Laptop Stand from Contour Design is a flexible, height-adjustable stand which elevates laptop or notebook screens to a more ergonomic viewing height. The lightweight stand conveniently folds down for storage or transport, and can easily fit in a pocket. The six different settings offer varying degrees of laptop/notebook screen elevation or 6 different screen viewing angles for tablets. Despite its light weight, the Contour Portable Laptop Stand can support up to 12 pounds. This stand is ideal for business travelers, students, and anyone who uses a laptop computer or tablet. When combined with an external keyboard and mouse it can greatly improve portable workstation ergonomics.

The Red Plus Palm Support from Contour Design is designed specifically to provide more support for individuals with larger hands. It is exclusive to the RollerMouse Red mousing device and comes with 2.25" of extra support for the hands and wrists over the standard Red Palm Support. This accessory can be purchased for attachment to any RollerMouse Red (it replaces the standard arm support). It is also available pre-installed on both the Wired and Wireless RollerMouse Red "Plus" models.

Le Red Plus Palm Support de Contour Design est spécialement conçu pour offrir le support supplémentaire aux gens ayant de grandes mains. Il est exclusif de la souris RollerMouse Red et vient avec un support supplémentaire de 2.25po pour les mains et les poignets par rapport au Red Palm Support standard. Cet accessoire peut être acheté pour être fixé à n'importe quelle RollerMouse Red (il remplace le support de bras standard). Il est également disponible préinstallé sur les modèles RollerMouse Red "Plus" Avec Fil et Sans Fil.

Contour Design offers two different Shuttle devices that are powerful productivity enhancement tools for video and audio editors. The ShuttlePRO V.2 offers the wider range of function and customization. It features 15 programmable buttons (9 with removable covers to accommodate custom legends) as well as highly responsive Shuttle and Jog controls that provide excellent tactile feedback. The ShuttlePRO driver comes pre-configured with settings for over 100 Audio and Video editing applications. In fact, it will detect the active application and automatically switch to the appropriate shortcut profile. Of course the driver can also be used to easily modify or create custom profiles to match individual production demands. Macro capabilities mean that multiple tasks can be assigned to and executed with the press of a single button.

The ShuttlePRO V.2 provides multimedia editors with a ergonomic editing interface that will let them better maintain and maximize their productivity. This device features a low-profile ambidextrous design that facilitates one-hand access to the fifteen (15) fully programmable buttons, the inner Shuttle dial and the outer Jog wheel. The alloy inner ring or "shuttle" has 3 "dimples" for fingertip control and rotates smoothly and continuously through 360°, with distinct tactile detents. The outer black ring or "jog" is rubberized and spring-loaded. It facilitates fast forward and rewind, and returns to centre immediately upon release. Both the jog and shuttle can be custom configured for many other purposes such as scrolling, volume control, sequencing, even mouse clicks.

If the 15 buttons seem daunting the more affordable ShuttleXpress offers a smaller number (5) while retaining the same programming functionality.

Contour Design offers two different Shuttle devices that are powerful productivity enhancement tools for video and audio editors. The ShuttleXpress is the basic model - and the smaller and more compact of the two. It features 5 programmable buttons as well as highly responsive Shuttle and Jog controls that provide excellent tactile feedback. The ShuttleXpress driver comes pre-configured with settings for over 100 Audio and Video editing applications. In fact, it will detect the active application and automatically switch to the appropriate shortcut profile. Of course the driver can also be used to easily modify or create custom profiles to match individual production demands. Macro capabilities mean that multiple tasks can be assigned to and executed with the press of a single button.

The ShuttleXpress provides multimedia editors with a ergonomic editing interface that will let them better maintain and maximize their productivity. This compact device features a low-profile ambidextrous design that facilitates one-hand access to the five (5) fully programmable buttons, the inner Shuttle dial, and the outer Jog wheel. The inner dial or "shuttle" has a convenient dimple for fingertip control and rotates smoothly and continuously through 360°, with distinct tactile detents. The outer black ring or "jog" is rubberized and spring-loaded. It facilitates fast forward and rewind, and returns to centre immediately upon release. Both the jog and shuttle can be custom configured for many other purposes such as scrolling, volume control, sequencing, even mouse clicks.

If the features and functions of the ShuttleXpress appeal but a greater level of customization is desired the ShuttlePRO V.2 offers an additional 10 programmable buttons.

The RollerWave3 is designed to replace the two removable foam pads that come standard with the RollerMouse Pro3. The replacement unit plugs into the slots on the frame of the RollerMouse Pro3, providing a larger surface area for resting the palms. Like the leatherette pads it replaces, the RollerWave is designed in a contoured shape to maximize comfort, is made of the same materials, and can be cleaned with mild soap and water. Available in black only (RM-WAVE-03) it weighs approximately 1 lb. The dimensions are 5" x 20" (adds 2" to the depth of the RollerMouse as originally configured).

NOTE: The standard palm pads which come with the Rollermouse Pro3 are not available as an accessory.

The RollerWave3 is not compatible with the RollerMouse Free3 or the older Pro2.

Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.

The RollerWave is designed to replace the two removable foam pads that come standard with the RollerMouse. The replacement unit plugs into the slots on the RollerMouse's frame, providing a larger wrist-resting surface. Like the foam pads it replaces, the RollerWave is designed in a contoured shape to maximize comfort, has an improved foam 'gel', and is fully cleanable with mild soap and water. Available in both white (RM-WAVE-01) or black (RM-WAVE-02), weighs only 1 lb. Dimensions: 5" x 19.875" (adds 2" to the depth of the RollerMouse).

NEW - RM-WAVE-LP - a more inexpensive version of the RollerWave is now available which is made of solid plastic making it far easier to clean and resistant to static and dirt buildup. The RollerWave LP is composed entirely of synthetic materials and thus has no padding or extra layers. Because of this, it has an extremely low profile, which means that RollerWave LP gradually tapers down to the worksurface. RollerWave LP has also been expanded somewhat to the left, to provide optimum support for the left arm as well as the right.

Its smooth surface minimises friction when you move your hands around the keyboard and RollerMouse. The finish is matte, so there is no unwanted reflection. And last but absolutely not least, RollerWave LP is easy to clean, which makes it especially well suited for computers that have several users.

All Rollerwaves are compatible with the RollerMouse PRO, RollerMouse PRO2, and the Classic RollerMouse. The RollerWave is not compatible with the RollerMouse Free.

Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product.

The RollerMouse Free2 by Contour Design is a central pointing device with a rollerbar that is positioned between the torso and the keyboard. This allows performance of all mousing actions in the area immediately in front of the keyboard and eliminates the need to reach out to the side. The 9.75" roller bar can move along the entire 15" width of the device, allowing either or both hands to be used. The method of input can be varied while keeping both hands within a small work area.

The cursor is moved by rolling a 'dowel' or cylindrical control bar with the fingertips to achieve 'up' and 'down' movement, and sliding this bar from side to side for horizontal movement. Once the desired location is achieved, a left click can be generated by pressing down on the bar (the force required for this is adjustable from ultra-light touch to highly tactile). Seven buttons and a scroll wheel are located below the bar to generate left/middle/right/double clicks, copy, paste and vertical scrolling. There is also a DPI adjustment button to toggle from 800 to 1600 dpi to allow the individuals to select their preferred cursor speed.

The Free2 comes with detachable keyboard 'risers' to lift up thinner keyboards to an appropriate height (3 height settings), ensuring a custom fit for every user. The included low profile palm supports are easily removed.

*** Note: Keyboard not included.

Compare RollerMouse Free2 with RollerMouse Re:d and Pro2, Mousetrapper Advance Plus, and Mousetrapper Flexible.

La RollerMouse Free2 par Contour Design est un dispositif de pointage central qui utilize un rollerbar qui élimine le besoin d' une souris traditionnel et est positionné entre la personne qui l`utilise et le clavier/ ordinateur portable. Comme ça vous etes capable de faire tout activiter de la souris immédiatement ci-dessous le clavier, en éliminant de s`étirer pour chercher la souris. Comme la bar de 9.75 pouces peut bouger du largeur tout a bors du dispositif de 15 pouces, n`importe qu`elle main peut l`utiliser. Voici la belle de la polyvalent en gardant les deux mains dans un espace concentrer, éliminant les grands mouvements de ce tendre le bras.

Le curseur est bouger en roulant une barre de contrôl cylindrique avec les bouts des doigts pour bouger le curseur en haut/ en bas. Vous bougez la barre cylindrique du côter gauche a droit pour avoir le contrôl du curseur horizontale. Quand le curseur est a la bonne place, vous pouriez donc faire le clic gauche avec la barre cylindrique (la force pour faire le clic est réglable entre vraiment sensible jusqu`a très tactile). Sept boutons et une roulette a défilement sont desous la barre cylindrique pour faire les clics gauche, millieu, droight, double clic, couper, coller, et roulette a défilement. Il-y-a aussi le bouton d`ajustement du DPI qui fait une touche a bascule entre 800 jusqu`a 1600 DPI pour choisir la vitèsse du curseur.

La Free2 vient avec des supports élévateurs de claviers pour élever les claviers plus minces a une hauteur plus approprier (3 hauteurs de choisir), qui vous donne la compatibiliter pour chaque utilisateurs. Le low profile palm supports qui est inclus, est facile a enlever.

*** Noté: Le clavier n'est pas inclus.

Compare la RollerMouse Free2 avec la RollerMouse Re:d et la Pro2, Mousetrapper Advance Plus, et Mousetrapper Flexible.